Removing Kickpanel near accel

[YOOT]

Ok - so how do I remove the kick panels on both sides of the car in the ute?

I can take the scuff plate off and remove the rubber from the front and rear of the door sill, but I'll be damned if I know what to remove next. I cracked my B pillar trim at the bottom trying to get that out.

DO I need to remove the seat?

Any healp would be muchly appreciated.

Thanks in advance.

[KAL_SPL]

Unbolt the seat belt at the bottom

Remove the trims around the bottom of the seats

unclip the cover from the seatbelt on the top half of the B pillar

2 screws then the bottom half will unclip

2 screws in the side step then that unclips

then the whole side skirt and kick will unclip while pushing it towards the glove box.

[YOOT]

Bloody hell! Might try that tomorrow! Thanks for the help.

[FORDTECH]

Rednut,Just be carefull when removing the seat base trims.The retaining spring clips break off very easily.(from experience).

[YOOT]

Are they those ones with the littel screw in them?

[FORDTECH]

No. They're only held on with clips.The trim that you are refering to is the one attached to the actual seat base and you dont have to remove that one.The 2 peice trim below that is the one I mean.