Jump to content

Setting up a home WiFi wireless ADSL connection.


Mondie

Recommended Posts

  • Firm Member
  • Donating Members
  • Member For: 22y 3m 14d
  • Location: Adelaide Hills

Work were kind enough to hand over a new Dell laptop that includes a Centrino processor that has built in wireless LAN.

From what l can work out if l get an ADSL connection and a wireless modem such as the D-Link DSL-604+ (less than $300) l can have a wireless broadband connection at home. l really like the idea of a wireless always on connection.

Has anyone done it or looked into the possibility? l am a bit of a gumby when it comes to computers :spoton:

Link to comment
Share on other sites

  • Replies 31
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

  • Gandalf the Grey, Maiar of Manwë and Varda, Team HgAg/Sneaky
  • Member
  • Member For: 21y 7m 16d
  • Gender: Male
  • Location: The Shire, Middle Earth

Sorry mate, I've got a more traditional ethernet "wired" network in my house.

:spoton:

Link to comment
Share on other sites

  • In Your Face
  • Member
  • Member For: 21y 11m 6d
  • Gender: Male
  • Location: Peninsula

I haven't done the wireless bit..but l have ADSL hooked up on all my PCs at home including laptop and l use SOLIDSHARE, with this you dont need a router as everyone else will tell you :spoton:

Link to comment
Share on other sites

  • No boost, no bottle, just my foot on the throttle!
  • Lifetime Members
  • Member For: 21y 1d
  • Gender: Male
  • Location: Sydney

Hel$tra now offer a home wireless ADSL connection as part of their standard product range.

The only thing I can say about wireless is make sure you only turn the wireless on when you need it. Unless you are having it setup by an expert (not Hel$tra) you will not want to leave the wireless running for any lenght of time.

I can hack most wireless connections within about 2 mins if they are not using WEP and MAC security. While it is convienient to have wireless it is VERY insecure unless it is setup correctly. I took a client to North Sydney and sitting having lunch I showed him 86 different networks I could attach to and in 15 mins I had IP access to 26 of them without much effort.

You have been warned.

Link to comment
Share on other sites

  • zeke
  • Member
  • Member For: 21y 7m 25d
  • Location: Adelaide

Hi Mondie

If you go to bc.whirlpool.net.au or forums.whirlpool.net.au, you'll find all you ever needed to know about broadband.

Thanks to that site I got notification today that my access to broadband (through Internode) has been confirmed, when I was previously told by Telstra that I couldn't get ADSL due to being on a pair gain/RIMM system. I was lucky enough to score a transposition to a copper line. And the ISDN was only removed on Wednesday.

Because I don't currently have a laptop, I'll probably go with an ethernet adsl modem/router/switch. My computer guy has recommended the netgear DG834 due to its inbuilt hardware firewall. The DG834G is the same thing with wireless capability.

Blown BA, the conventional wisdom is that a hardware ethernet router is much less of a hassle than software alternatives, but, if it works for you......

I'll probably go wireless in the future - adding a computer to the audio-visual gear brings up a lot of possibilities. If I were you and had a wireless equipped laptop, I'd probably go wireless from the start.

Regards

zeke

Link to comment
Share on other sites

  • Sucker
  • Moderating Team
  • Member For: 20y 9m 21d
  • Gender: Male
  • Location: Brisbane

One quick suggestion, as well as the encryption it is also an idea to filter by MAC address. In your wireless router/access point you should be able to configure it to talk to only specific devices - as every device has its own unique MAC address.

At least then you will keep out nasties (no offence ZapXR6T) as it will only communicate with your defined list of allowed devices.

Trent.

Link to comment
Share on other sites

  • No boost, no bottle, just my foot on the throttle!
  • Lifetime Members
  • Member For: 21y 1d
  • Gender: Male
  • Location: Sydney

The netgear DG834G is a great device. They cost about $259 and have a SPI firewall, 4 port switch and 54mb wireless. This is what I have at home. It supports MAC filtering and WEP, so if setup propperly they can be fairly secure.

Link to comment
Share on other sites

  • In Your Face
  • Member
  • Member For: 21y 11m 6d
  • Gender: Male
  • Location: Peninsula
Blown BA, the conventional wisdom is that a hardware ethernet router is much less of a hassle than software alternatives, but, if it works for you......

Regards

zeke

Not only has it worked for me , but also lots of my friends too love it. Its easy and its for free too, wireless like Zap has mentioned is a hackers deleight. And as for routers why spend 300 to 400 bucks when SOLIDSHARE is for free and works a treat :blink:

Link to comment
Share on other sites

  • zeke
  • Member
  • Member For: 21y 7m 25d
  • Location: Adelaide

Not sure if we're talking about the same thing. I've ordered a netgear DG834 (not wireless) for about $170. It'll connect to both of my computers via the 10/100 ethernet cards and I won't need any special software to share the internet or network between the computers. It incorporates ADSL modem, firewall, router and switch and can connect up to 4 computers.

Am I missing something here?

Link to comment
Share on other sites

  • Sucker
  • Moderating Team
  • Member For: 20y 9m 21d
  • Gender: Male
  • Location: Brisbane
Not sure if we're talking about the same thing. I've ordered a netgear DG834 (not wireless) for about $170. It'll connect to both of my computers via the 10/100 ethernet cards and I won't need any special software to share the internet or network between the computers. It incorporates ADSL modem, firewall, router and switch and can connect up to 4 computers.

Am I missing something here?

Same concept, no ethernet cables.

Wireless is realy only worth the effort for laptops or if you want to avoid cabling.

Trent.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.



×
  • Create New...
'