Guest PHNTUM Guests Posted 06/03/03 11:18 AM Share Posted 06/03/03 11:18 AM I heard the best springs to use are a german made IBACH lowered spring they never sag ovr time but r very expensive around the $320 mark .Has anyone used them or does anyone know where to get em.I know SVO is an agent to sell em. Link to comment Share on other sites More sharing options...
Guest Bathrone Guests Posted 06/03/03 12:13 PM Share Posted 06/03/03 12:13 PM Falchoon could you please post what specific mods you had done, and your driving experiences post mod wth itThanks mate Link to comment Share on other sites More sharing options...
Falchoon I see red Member 5,758 Member For: 22y 1m Location: nowhere in particular Posted 09/03/03 03:50 AM Share Posted 09/03/03 03:50 AM My initial thoughts were that the car seems to ride a lot harder, maybe too harsh with the new springs and that maybe I'd stuffed up by getting it done. But the more I drive it the more I get used to it and two days later it seems OK. It is still a lot softer sprung than my EB with Lovells and Bilsteins. It sits a lot flatter on the road thanks to the 30mm front and 24mm rear sway bars. The ride height doesn't seem to low (so far), just brings the tyres up into the guards ever so slightly, so looks wise it's OK. It would be far too impractical to have it any lower though I see plenty of Late model camira utes around that are a lot lower. I guess the real test will come next weekend when I plan a trip down through Kangaroo Valley and Cambawara Mtn. Before pic Link to comment Share on other sites More sharing options...
Falchoon I see red Member 5,758 Member For: 22y 1m Location: nowhere in particular Posted 09/03/03 03:54 AM Share Posted 09/03/03 03:54 AM After pic*NOTE* No Jim Beam was harmed during this photo shoot, can is for purely demonstration puposes only... Link to comment Share on other sites More sharing options...
Falchoon I see red Member 5,758 Member For: 22y 1m Location: nowhere in particular Posted 09/03/03 03:59 AM Share Posted 09/03/03 03:59 AM Before side view Link to comment Share on other sites More sharing options...
Dagabond Bored Member Administrator 35,722 Member For: 22y 2m 3d Gender: Male Location: Dé·jà vu Posted 09/03/03 03:59 AM Share Posted 09/03/03 03:59 AM The angle you've taken the 2 pic's on makes it look the same height. :lol: do you have a side on pic of gaurd clearance? Link to comment Share on other sites More sharing options...
Falchoon I see red Member 5,758 Member For: 22y 1m Location: nowhere in particular Posted 09/03/03 04:00 AM Share Posted 09/03/03 04:00 AM Afrter side shot Link to comment Share on other sites More sharing options...
richdave SLOJAM, Gone but not forgotten Lifetime Members 1,841 Member For: 22y 3m 6d Gender: Male Location: Outer east - Melbourne Posted 09/03/03 12:10 PM Share Posted 09/03/03 12:10 PM all I can say is watch those curbs and speed humps...having already scratched the front of mine. Link to comment Share on other sites More sharing options...
wesa182 Member 14 Member For: 21y 10m 22d Posted 09/03/03 11:38 PM Share Posted 09/03/03 11:38 PM Should try pedders suspension.Made my ute ride nice and handle awesome. Link to comment Share on other sites More sharing options...
Guest PHNTUM Guests Posted 10/03/03 01:29 AM Share Posted 10/03/03 01:29 AM Pedders have sold there franchise to a overseas company there products imported are not as good a you think and you will find that the cheap imported springs will sag over time and I have had lots of problems with there shocks. Never againThere only two brands of products IBACH spring German made of the best quality.King springs ok but still have my doubts. Still looking for more info on spring so plz share you views.In shocks KONI is the market leader in performance shockers.The way I see it if you can afford 50k for a car why would u put pedders cheap lowering kit for around $500Harrod Motor sport lowered kit seem very good ay around $950 using good products.SVO Motorsport use IBACH springs and differnt leaf spring at the back for around the same $800But I have decided to purchase IBACH springs, KMAC rachet style CASTOR/CAMBER kit and New lowered leaf springs (Not reset ones cos they start to sag after time too) and std sway bars are big enough so not required to be replace with bigger ones. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now