Guest xrtwpn Guests Posted 10/11/04 10:10 AM Share Posted 10/11/04 10:10 AM you can get any stereo installer to do it and its cheap too Link to comment Share on other sites More sharing options...
fordboy1981 Donating Members 2,075 Member For: 22y 18d Gender: Male Location: Sydney, NSW Posted 10/11/04 02:16 PM Share Posted 10/11/04 02:16 PM Robin would you be prepared to do these for other forum members and if so at what cost.What you've done sounds great. Geea. yeah, that would good!!! I would pay for the loom and that little circuit, that would be great!! Dave. Link to comment Share on other sites More sharing options...
sykes Member 408 Member For: 21y 5m 18d Location: Brisbane (Parkinson) Posted 10/11/04 10:30 PM Share Posted 10/11/04 10:30 PM Robin would you be prepared to do these for other forum members and if so at what cost.What you've done sounds great. Geea. <{POST_SNAPBACK}>yeah, that would good!!! I would pay for the loom and that little circuit, that would be great!! Dave.<{POST_SNAPBACK}>Yep sound great how much I think I will have one too mate!Even if you just made the wiring loom and we sourced our own STB!Mick Link to comment Share on other sites More sharing options...
sykes Member 408 Member For: 21y 5m 18d Location: Brisbane (Parkinson) Posted 10/11/04 10:33 PM Share Posted 10/11/04 10:33 PM By the way how does all this work if you already have a mobile phone kit connected to Aux inputs under the dash? Is that where all this is connected for the audio? Can they both be spliced into the same points? Link to comment Share on other sites More sharing options...
aaronmihe Upstanding Member Member 759 Member For: 21y 5m 1d Location: Canberra - ACT Posted 11/11/04 12:21 AM Share Posted 11/11/04 12:21 AM The mobile phone wiring is different to the AUX audio wiring.I'm taking a stab, but what I guess has been does is the circuit watches a pin (whatever it is I can't remember) that goes to 5-8v when an appriate input is given, and 12v when a 4:3 input is given. Simply have a like inverting buffer chip (or unbeffered) have it power up of the same line and pull the enable to ground. use a couple of basic passives and knobble it if V > 8v to be really tricky.I was talking to a Territory ower a day or two ago and mentioned that I d=could drop some wiring info for the AUX audio and video on him if he wanted to play.... Oddly enough he pointed at the nearby car stereo shop and said "those guys have got it all". I sorta asked a bit more and to cut a long story short ended up lookign at my own doco for the AUX stuff and the clowns were then selling this in conjuction with some Blau gear for $$$$. *laughs* All I can say guys is be very careful about who and how much you pay for some of this stuff - the sharks are circling. BTW geea I'm still waiting on those freaking plugs....A. Link to comment Share on other sites More sharing options...
Guest ba XR6 Guests Posted 11/11/04 04:52 AM Share Posted 11/11/04 04:52 AM that is a mean deal 160 bucks for didgi TV on the ICC so the teac is all you need dont need any inverter or anything like that, just plug the scart plug to the icc and the sound to the AUX and your alll sweetthat's mad I am on the hunt for the teac Link to comment Share on other sites More sharing options...
fordboy1981 Donating Members 2,075 Member For: 22y 18d Gender: Male Location: Sydney, NSW Posted 11/11/04 06:30 AM Share Posted 11/11/04 06:30 AM well do we get an answer??Dave. Link to comment Share on other sites More sharing options...
Scruffman Member 255 Member For: 21y 20d Gender: Male Location: Prestons NSW Posted 19/11/04 07:06 AM Share Posted 19/11/04 07:06 AM OK people,I was able to track down a DV-B400 from teh good guys at Penrith ( last one )I have made up teh cables as described in this thread and hooked it up and all is going well.I have tried a Magnavox omni-directional antenna with not much reception luck. I have today hooked up my UHF antenna ( vertical whip type ) and the standing still results are very good from intitial view while standing still. Will test and see how it goes.ScruffmanOH the box cost me $200 and the plugs etc would be no more than $20 plus about 2 horus of your time. Looks great I must say, now for teh DVD player ( Xbox ). Link to comment Share on other sites More sharing options...
fraggle Yes I am too tall for my hair Member 261 Member For: 20y 4m 4d Location: Launceston Tasmania. Posted 20/11/04 05:40 AM Share Posted 20/11/04 05:40 AM can someone tell me if a thompson dti500au stb will work ive got one at home input is 200-240v down to 12v has rgb scart plug it video output is 16.9 wide screen also has componate in rca plugs (dvd,ps2,xbox)I suppose.if someone could have a look at it at www.dba.org.au that would be great and there only 250 bucks I should be able to do this very cheap Link to comment Share on other sites More sharing options...
badabing Member 40 Member For: 21y 3m 24d Location: Sydney Posted 21/11/04 12:49 AM Share Posted 21/11/04 12:49 AM Has anyone tried the Teac DV-B420 seems to have similar specs to the 400 which is now harder to find? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now