geea Site protagonist Lifetime Members 4,320 Member For: 21y 9m 11d Gender: Male Location: At the lights, waiting for you. Posted 06/04/04 11:39 PM Share Posted 06/04/04 11:39 PM Was at the FPV & XR owners club of Victoria meeting last night and one of the speakers was from FPV. I dont remember his name but he was speaking about the F6 Typhoon. A majority of the crowd was V8 people that were not real happy about the F6. A few of the points that people may find interesting, some might know this already some might not. The F6 uses the same fuel delivery system as the "T". Same fuel pump and same injectors. The only real difference besides a few stregthened internals are the second air intake. The bigger intercooler, this is where they get the extra boost, due to less pressure drop. The boost is up 2-3psi at the intake manifold.Using the same injectors as the "T" means that the car will have similar limits on power. Someone asked about times the car would run and I pointed out that my car had similar boost as the F6 and was running 13.3's. I said that the F6 would probably be mid 13's which might upset GT owners, he smiled and said this would be close.Was a good night.Geea. :banghead: Link to comment Share on other sites More sharing options...
ms700 Moderating Team 10,170 Member For: 22y 23d Gender: Male Location: Sydney Posted 06/04/04 11:56 PM Share Posted 06/04/04 11:56 PM Thanks for the info Geea. Did they do something to the ECU so its doesnt have a heart attack when the boost goes over 6.5 psi? Is there any point fitting a Typhoon intercooler to a standard T then? Once the boost goes over 6.5psi, wont the ECU start cutting cylinders? Link to comment Share on other sites More sharing options...
Adam Here since the start... Lifetime Members 10,282 Member For: 21y 9m 28d Gender: Male Location: Victoria Posted 06/04/04 11:59 PM Share Posted 06/04/04 11:59 PM Fordtech mentioned to me that he can't wait to get the ECU calibrations for the F6 so he can flash them into a XR6T and see what happens. Link to comment Share on other sites More sharing options...
geea Site protagonist Lifetime Members 4,320 Member For: 21y 9m 11d Gender: Male Location: At the lights, waiting for you. Posted 07/04/04 12:01 AM Author Share Posted 07/04/04 12:01 AM He didn't talk about the CPU, but I'd asume that it was programed for the 8-9psi of boost. I doubt there would be any benefit to fitting the typhoon intercooler without fitting an after market chip such as the Xede or Unichip. It might even go in to limp mode due to excessive boost.Geea. Link to comment Share on other sites More sharing options...
geea Site protagonist Lifetime Members 4,320 Member For: 21y 9m 11d Gender: Male Location: At the lights, waiting for you. Posted 07/04/04 12:03 AM Author Share Posted 07/04/04 12:03 AM Fordtech mentioned to me that he can't wait to get the ECU calibrations for the F6 so he can flash them into a XR6T and see what happens. That would be a very interesting experiment. I wish I had asked about the possibilities of using the F6 calibrations on a modded "T".Geea. Link to comment Share on other sites More sharing options...
Blown BA In Your Face Member 6,195 Member For: 21y 11m 14d Gender: Male Location: Peninsula Posted 07/04/04 12:52 AM Share Posted 07/04/04 12:52 AM Thanks Geea great info...l have now decided the F6 is not worth the money better stick to the T :banghead: Link to comment Share on other sites More sharing options...
Falchoon I see red Member 5,758 Member For: 22y 2m 6d Location: nowhere in particular Posted 07/04/04 01:24 AM Share Posted 07/04/04 01:24 AM Thanks for the info Geea. Did they do something to the ECU so its doesnt have a heart attack when the boost goes over 6.5 psi? Is there any point fitting a Typhoon intercooler to a standard T then? Once the boost goes over 6.5psi, wont the ECU start cutting cylinders? I think Harasn has said before it's very easy for a Fordtech to tweak the computer settings as they have the right software and stuff, don't think it's a job that dealers can do though. I think you are right there's probably not a lot of purpose in upgrading the intercooler on a standard T because of the problems you mentioned. Link to comment Share on other sites More sharing options...
Adam Here since the start... Lifetime Members 10,282 Member For: 21y 9m 28d Gender: Male Location: Victoria Posted 07/04/04 01:31 AM Share Posted 07/04/04 01:31 AM What about banging on an intercooler, air intake setup, new valve springs and get the F6 cals flashed into the ECU and hey presto XR6T now a F6.....maybe? :banghead: Link to comment Share on other sites More sharing options...
geea Site protagonist Lifetime Members 4,320 Member For: 21y 9m 11d Gender: Male Location: At the lights, waiting for you. Posted 07/04/04 01:37 AM Author Share Posted 07/04/04 01:37 AM What about banging on an intercooler, air intake setup, new valve springs and get the F6 cals flashed into the ECU and hey presto XR6T now a F6.....maybe? My understanding from what the FPV bloke said was that this could very well work. I'm not sure where you would get the flash though, would Ford dealers get it when the F6 is released? If so it could be a good idea to get real friendly with your local dealer.Geea. Link to comment Share on other sites More sharing options...
Dagabond Bored Member Administrator 35,722 Member For: 22y 3m 9d Gender: Male Location: Dé·jà vu Posted 07/04/04 01:45 AM Share Posted 07/04/04 01:45 AM What about banging on an intercooler, air intake setup, new valve springs and get the F6 cals flashed into the ECU and hey presto XR6T now a F6.....maybe? I can see a mad rush when one hit's the wreckers already. :lol:Anything on there trans choice at all Geea? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now