Search the Community
Showing results for tags 'interior'.
Found 9 results
-
Hey guys just wondering if you could help with my fg my air vents were broken the other day and I fixed them via pulling out glove box and satin trim. whilst putting the glove box back in I’ve obviously done damage. After messing around doing that, the interior roof lights aren’t working AT ALL glove box light,, also the car says “transmissions not in park” when you turn the key off. I’m at a lost cause, also am unsure of what fuse to check? After some searching I found sound forum on a similar issue the last comment might have something to do with it https://fordforums.com.au/showthread.php?p=4814363 -
Hi Guys and Gals, As requested by some mates of mine, I've taken some videos and photos of my 2009 FG XR6T Ex VICPOL HWP to show some of the differences and ways to spot an ex police car including the dual battery system in the boot. Feel free to click on the advertisements Comment/Rate/Subscribe! First is a video of the interior modifications and things such as where the gun rubs on the seat etc: Second is the dual battery system and modifications in the engine bay: Third is the dual battery system and modifications to the boot: Photos are self explanatory. Exterior Interior Differences -
Hey guys just wondering if anyone knows where I'd get a set of black sun visors and map reading lights for my fg sedan or knows the best way to do it myself, can't find them anywhere. Thanks
-
How to change interior reading lights on AU
grover-au posted a topic in Interior & Exterior Workshop
How does one change a blown bulb on an XLS AU. I can't see a way to remove just the lights and what I've read on this site it about removing the whole console... which involves removing the headliner... which seem overkill for a blown bulb. -
Here is a photographic guide how to change the interior light globes in your BF XR Falcon. Firstly, here is a link to where I got my globes from. Very fast postage and very nice product. http://www.ebay.com.au/itm/FORD-BA-BF-XT-XR6-XR8-TURBO-F6-INTERIOR-LIGHT-KIT-WHITE-/220755235240?pt=AU_Car_Parts_Accessories&hash=item33660991a8&_uhb=1#ht_5549wt_986 ----------------------------------------------- Reading Lights ----------------------------------------------- Remove the housing by grabbing from one corner and pulling down until clips release. Remove housing and unclip power from the back. To remove lights, grab and rotate anticlockwise Remove globe by simply pulling straight out. Replace globes with your desired colour LEDs Plug the power back in and push the housing back into the roof until it clips in. Done. Before & After ----------------------------------------------- Main Cabin Light ----------------------------------------------- Start by removing the plastic cover. Now remove the globe, be careful, this is really tight so try and loosen the clips a little before pulling on the globe. Replace with the desired colour LED. Replace plastic cover. Before & After ----------------------------------------------- Rear Seating Lights ----------------------------------------------- Remove by using fingers or a flat head screw driver to open from the drivers end of the housing. Unplug from power for easy globe removal These globes are bayonet type globes, so just push and rotate. Close up of the globe and housing. After completing all globe changes. Thanks guys
-
Here is a photographic guide to help you change the colour of the Ignition Illuminator on your BF MkII XR6. Here is a link to the globes I used from eBay. You need a T4 Wedge globe. http://www.ebay.com.au/itm/130582917218?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 Starting with the stock orange light you can see here... Under the steering column you will see 3 screws, philips head. Remove all 3 of these. Now the bottom and top halves will separate on the column and you can completely remove the bottom half. You will need to unplug this power lead. (you can do this first or second) Here is the screw that will release the housing so you can proceed to the next step. Again philips head. Now you will be required to remove the following 4 clips to open up the housing. This is a bit tricky but it will help with a flat head screw driver. Here is the T4 Wedge Globe, using a flat head, twist and remove. Replace with your desired colour LED Now return to the car and plug it back in, test. Once confirmed it is working, place the housing back over the ignition, screw back it in and replace the steering column cover, screw in and ensure the top half is in the correct place. After Cheers guys
-
Hey guys, Just a quick question which I am sure you have all heard or been asked a thousand times already. I had a quick look on the forum and was unable to see a topic regarding this, possibly due to me being a blind sod. Anyway. I have an 03 XR6T with the standard seats being black with the grey pattern. Does anyone know where I could get the door insert pattern parts in the Phantom colour? I have looked on ebay and a guy wants some $700-$800 for just the insert/trim bit (I dunno what to call it, sorry) Looking to do the front and back and then find someone to do upholstery on the seats. Am in Brisbane if that makes a difference. Any help would be appreciated. Cheers.
-
From the album: Robs XR6T MercSilver
-
From the album: Robs XR6T MercSilver
