Search the Community
Showing results for tags 'ba falcon'.
Found 3 results
-
I recently got an xtreme clutch kit put in My Falcon and the kit came with a new concentric slave cylinder, I am wondering whether the t5’s have a release bearing seperate to the CSC and if so then they re used the old one or whether the new CSC comes with an integrated release bearing? Can anyone clarify this please? kit was KFD26690-1A
-
Evening all. I just have a quick question regarding a BA xr6 NA+T on whether I should put 6.5litres (NA) amount or 7 litres (turbo)? Every time I go to change the oil I always forget what I should put in. (Every time……..) also on a side note, when I got home today, I accidentally stalled the car 🤦♂️ because the clutch is on its way out and with the key still in the ‘on’ position but the engine off after stalling, there was a chiming sound and the oil light flashed after about 3 seconds. Anything to be concerned about? definitely has good, clean oil in it.
-
Hey guys, so I drive a 2002 ba falcon and just yesterday it broke down during my 8 hour roadtrip. I was driving along goind around 110 km/h when suddenly what seemed to be the transmission, started jerking for a few seconds. Immediately after, the revs shot up to 3500, I'm assuming it went into 'limp' mode. I then started hearing strange noises such as a loud grinding noise coming from under the car, I immediately pulled over and could smell some sort of fluid, but there are no leaks. Now whenever I select Drive or Reverse I hear this grind noise. I assume this is very bad, has anyone else had a similar problem.. Any help would be much appreciated.
