Search the Community
Showing results for tags 'TR6060'.
Found 1 result
-
I appreciate that these boxes can be a bit notchy, especially the 1st to 2nd gear change, but has anyone with these boxes experienced 2nd gear grinding? It happened maybe once or twice in my FG XR6T and was me being lazy with the clutch, but it's happened in my GT much more frequently when I'm giving it a good boot full and shifting hard 1st to 2nd. It's not as a result of me being lazy with the clutch either, as I've made a conscious effort to make sure the clutch is pressed in fully...if it was in any further it'd be through the firewall. It's been more pronounced since having a Rip Shifter fitted, but I'm told by the shop who installed the Rip shifter that it was setup correctly with the positive stops as if they weren't it would pop out of gear etc. I also had a mate drive my car to see if it was just me and same thing happened to him twice in a short drive, the car was nice and warm too so it's not just a symptom of being cold. Is this just normal for these gearboxes, or does it sound like there's something wrong? My turbo I could be mid drift at the top of first gear and slam 2nd hard without any issues or grinding, but I'm somewhat nervous about doing the same with the GT...which is disconcerting. I've also noticed that with this car once I've let the clutch out after a gear change there's a tiny bit of play in the clutch, in that I can flick it out a tiny bit further than it releases on its own by lifting my toes up underneath the pedal. It also feels a little loose at which point and creaks a little, which I'd expect with an older model, but not a brand new car with 5,000kms on it. This is my first twin plate clutch, so is this normal? Or should it pop all the way out by itself and have no more movement at which point?
