Search the Community
Showing results for tags 'Speedo'.
Found 3 results
-
Hi all Noob here . Brought a bf2 xr6 turbo in may . Clocked up 10,000 kms in it . Been awesome but lately a little electrical fault and was wondering if anyone has experienced it . Driving along at various speeds and the speedo just cuts out. Pull over and restart and she comes back to life . Tonight I flicked on the high beams , it flashes the traction light and then the speedo just stops . Doesn't do it all the time though . Will get it on a scanner on the weekend and check any codes. Any light on this would be awesome Thanks Adam
-
my ba xr6t is now in limp mode, no speedo, in sequential shift mode, will only go into 1st n 2nd than hit roughly 3000rpm and it shudders than feels like its stuck in third. things ive tried so far - had a mechanic scan it and showed speed sensor error, would not let us clear error and nothing shows up when error happens. - checked all fuses and relays - cleaned speed sensors on all 4 wheels. - ran flash tuner on all 3 modes plus factory, no luck - disconnected battery for 10 minutes - changed from 19s to 17s what suggestions of things to check next?
-
I have a 2004 ba xr6 turbo and about 3 weeks ago my rear tailights stopped working however the brake likes still worked, I checked the fuses and globes and all was fine, also the speedo lights had stopped working, I resorted to driving only during daylight until I could take the car to get looked at, it wasnt long before the speedo stopped working all together and now all the indicators, brake lights, reverse lights and headlights wont work(hi beam still does) also the car wont turn over with the first turn of the key, but starts fine when I try a second time, does anyone heard of this problem? fixes?
