South

Guys and Girls, Just chasing a high quality trans shop in Perth metro, preferrably NOR but will travel if they are quality. I need to get my 4 speed completely flushed and re-filled with synthetic and the usual filter change... Its obvisouly not a hard job, but I want to make sure that whoever is doing it does exactly as asked. Look forward to responses

Just for comparison, I had Lovell lows fitted to the front and super lows to the rear of my 05. This ended up with 340mm front and 355mm rear which I didnt like to look of, so it put ultra lows in the rear and it ended up with 340mm front and 340mm rear and it sits perfectly! Any lower in the front and it would look stupid!

I ended up going direct to PWR to get the fittings, send them an email and they will know what you need. You can push the hose over the standard metal pipe, but its a pitta to do and I felt much safer having the correct fittings on.

well then you best share!

TomTom GO720 was my choice... TomTom or Navman are the only two choices.

I missed this, however bought mine direct from plazmaman... Anyway, I now have a massive high pitched squeal when I'm getting into it. All joiners are tight and secure, and I am getting 5.6psi max in all gears... The car is not tuned Anyone else getting a squeal?

Mine is garaged, takes me 10 mins to unlock it, move the other cars and get it out to drive. I refer to it as the 'fancy car' and the others are just to get to work...

We had fliers all over the suburb, so that's how the person got in touch with us. No, not particularly a rare breed, but she is pure breed and everyone wants a staffy She is also quite big for her age and very cute!

She will be back to her puppy training this weekend. We are on top of everything... The only concern I have is that she has been fed human foods, she has never been fed any human food before, and its not something we want to start.

Yeh, it doesnt matter much how it happened, shes back now, and back for good. Mummy is a vet nurse, so she was micro chipped 2 days after we bought her. Shes going to have a boyfriend on saturday, picking up puppy number two.

All is well, she has returned. She is skinny, has a sore paw, but was with another family for the last few days. I dont know if it was dodgy or not as he sent his kids to return her. She is happy to be home, just as her owners are happy to have her back!

We have had two break ins over the past 8 weeks, last time Dakota was outside and interacted with the people. The gates are all locked, there are no gaps in any gate where she can get out, the fences are all a minimum of 7ft tall. She can barely jump up onto the couch, let alone scale a fence. She has been stolen by whomever broke in last time, I guarentee you that much!

MISSING DOG Dakota, our 3 month old English Staffordshire bullterrier has gone missing. She was last seen secured in our back yard in CAVERSHAM with no means of escaping. It is believed that she has been stolen. Tuesday 14th October 2008 If you have seen her or actually have her, please call Ryan on 0438 937 023 or Debra on 0419 958 805. A large reward for her return will be given!! Please pass on to any sites you visit.

It's black, it will never be the same ( If you have filled in a police report, then send it to insurance and claim. You have the husbands details, so when they ask the name of the lady, say Mrs X Insurance will then chase them for the money, and you are not out of pocket at all. Don't feel one bit guilty about doing it either, they need to be taught their lesson, otherwise it will continue to happen time and time again...

I've got the interceptor gauges, and mine with an F6 intake and F6 intercooler and Plazmaman UBP runs 5.9psi with nothing else done to it.

Its the 4psi rule. Inflate them cold, drive until tyres have had a chance to warm up to a constant temp and check again, if they increase by 4psi then you are set... If they go up only a pound or two then you've pumped them too hard, if they go over by a few pounds then they are too low. I find 38psi in all my tyres on all of my cars is spot on.

I've got these fitted to my car, you can do pressure with the addition of a sensor and the sandwich plate. They cost a bomb, but are well worth it...

Power is a mathematical calculation, without torque and revs, you have no power gain.

Run it down the qtr and compare your times to others... Will then indicate the real power.

Yes, a fresh fully charged battery will have a noticeable improvement over a tired old battery. The greater the ability to supply power to spark, the stronger the spark and the bigger the bang.

I bought the first car that Kyle sold in his car sales career. Mine is also from Centre Ford. Most of my dealings were with Nathan though, and kyle was learning the ropes. You can definately push them down on the price, tell them you want it for X (be reasonable) and you will sign right now. All I can say is, is that the car you want, or a you settling of a car just because its the only one available in your range? You will kick yourself in a few months time if you settled, it will be the same with the N/A you bought...

that's pretty high quality if you compare it to other manfacturers. Have a look at the Nissan Patrol, panel paint is very average, and then the plastic wheel arches are horrid! Expensive Daewoo has always had pretty poor quality paint... As a detailer, were you able to cut it and improve the finish?

A big thanks goes out to a particular forum member who helped me out. I now have the whole assembly and my new scan gauges (aeroforce) fitted and working

Remove the drip tray under the bumper, jack up the car, and they slot in with a bit of swearing involved.

I go bananas if my mrs' or anyone leaves hair in the car, dont care if you malt, just dont freaking do it in my car!