Jump to content

Raptor_Z

Member
  • Posts

    43
  • Joined

  • Last visited

Everything posted by Raptor_Z

  1. Thanks mate
  2. Hey lads what are my options for FG NON turbo exhaust? I already have RED BACK cat back exhaust looking for Car or deleted one (hotdog) any idea? Moreover does XR6T cat fit on my car or not?
  3. Was torque converter all good now
  4. Lol yeah heard of flex plate cracking in Turbo any tips to do mounts I have got the proper jacks etc
  5. Ok so flex plate looks ok no bent in it nothing wrong, probably the torque converter is playing up a lil or it could be the Engine mounts anyone know how to change the engine mounts? It’s N/A not turbo thanks
  6. I probably Have to replace both 😔 what’s the torque settings on flex plate bolts if you know
  7. Do you reckon it’s the torque converter and flex plate ? I replaced the tranny and I think I messed up a lil with the flex plate and can feel some clunk noise in torque converter too probably flex plate is a lil bent? It’s like a truck noise shifting down gears
  8. Quick question fellows, car vibrates and shudders in low acceleration even while the car is idle and in P if accelerates. I know about the tail shaft balancing thing but as far as I know tail shaft vibration happens when the car not stationary anyone have any idea
  9. Cheers guyz heard both transmax z and gulf are good
  10. Yup zf6 tranny
  11. Just wondering which one is better fellows?
  12. Just wondering if turbo ones are more strengthened than the NAs
  13. NO both 6speed transmissions ZF6hp26 From 2010 they built 6speeds zf6 Wondering if TURBO ones are better than NAs
  14. I have got NA ZF6 6 speed on fg xr6 going to swap with turbo one FG XR6T
  15. Fg to Fg
  16. Hey champs Does TURBO Transmission fits to NON turbo Xr6 car? heard it fits ok just have to swap the mechatronics
  17. Dude See if the gear shifter wiring is unplugged, once you will plug that thing transmission error will not pop up I am assuming you have unplugged the cable while the shifter was not in park make sure your shifter is in park position once you plug it in good luck
  18. You are a legend champ heaps thanks
  19. Awesome champ sorry just confirming Do I still need to add distilled water in the PREMIX coolant or is it just for other coolant?
  20. hey fellows just disconnected the coolant hoses from the heat exchanger, coolant drained now do I have to top up from the coolant tank to fill it up to Max or there is any other way? which coolant should I use and should I have to add water in the coolant or premix is ok cheeds
  21. Sorry guyz just a lil thing do I need to run the car in all gears while filling up the tranny oil and it should be 35C to 50C warm Or is it just for the full flush and refill? By the way at the moment I am just topping it up
  22. Awesome thanks for the help fellows
  23. Hi lads going to do the normal Transmission service on my Fg what are the recommendations for the tranny fluid apart from the genuine ATF can I use PENRITE OR CASTROL Tq? anyone used these before and how much do I need to top up, plus what filter or gasket should I use? cheers 😊
  24. Sure cheers
×
  • Create New...
'