cat007

Howdy. Tried uwing Torque app adding the trans temp. There were 3. Two of which gave no reading and one gave a minus 40C reading, increasing to minus 35C as it warmed up while the car idled. Weird.

Haven't tried Torque app. Will do tonight! Will the free version work or do I need the full paid version? Do I add a custom PID or is it smart enough to do a scan? Cheers Hunt

Thanks mate - really appreciate it.

Hi Andrew. Thanks for that. I will monitor temps and try again. My OBDII tool doesn't connect to Forscan and the other random OBDII app I tried to use was telling me the trans temp was 176C.....yeah right. I don't suppose you were able to export the stats from that trip? I wasn't thinking just slots, I was thinking a louvre design to angle the air down, also to prevent the tyre from flicking dirt/debris at the cooler. You're right, hot air over one tyre may not be a good thing. Not sure how else I could vent it though. There isn't any air flow inside that area, especially with the lower undertray on. The inner guard was VERY hot when the fan was on.

Thanks. Helpful.

I've just installed mine with a fan under drivers headlight. There is no air flow though so with the fan on, blowing backwards, the inner guard is COOKING and I imagine the cooling effect is minimal. Thinking of cutting some slots in the inner guard. Thinking of making them like a louver vent so the wheel doesn't flick crap into them. Not sure how to go about this. Any tips?