Ultrex

Hi Guys - I am happy to receive constructive feedback - positive or negative - so we can improve what we make and produce what people want. Interesting comments regarding never dropping the cradle - the exhaust shop that fits them locally and developed it with us drops the cradle to remove the factory system so they dont destroy the heat shield as even the factory system is a challenge to get out...so whilst its dropped its easy to install our system. We didn't see that as a big deal to do as doesnt take that long - but if the consensus is that's a deal breaker - no problems - easy to change it. Aaronm and Ralph Wiggum - as you are in Perth and if you are interested to provide feedback/info on what you think does and doesnt make the best system - we are happy to listen up before revising - if keen please PM as would welcome the chance to chat and grab your input. This is actually a high quality system made by a top factory with a high level of consistency in what they produce. We produce different exhaust systems through many factories and this factory is by far the best, however they reproduce what we hand make here first. We fabricated the original system, had the factory reproduce it and after 12 months of revisions and changes got it perfect - then tested it on multiple cars and it fitted spot on and flowed well /made good power so we mass produced it. However if we can improve the design of the system in any way so its easier to fit, makes more power, sounds better, sits higher, looks better - whatever - then we are all for making the changes to make it the best system possible. Cheers Rob Ultrex Performance

Hi guys.. Sorry I was just made aware of this post being updated. I am unsure as to why its sitting low on your stock height car as we had developed it on a very lowered car here and it sits quite high under the vehicle. I suspect that the issue could be related to the cat piece being installed with incorrect orientation which would affect everything from the cat back as the cat piece can be rotated or put in back to front. The jig would not have changed as is new. Yep its a tricky system to install and rear cradle needs to be lowered to install it - however when installed correctly fits spot on. We have not ripped off anyones system.. The original system was fabricated in a Perth exhaust shop on a local car and we are currently also working on the Ute system for past 6months or so. The similarities if you look at the systems mentioned are stainless 4 inch and v band. Nothing else. I will pm you ironmantis for more info. Cheers.Rob

Hi Nathan - we didnt make this system to be modular or installed as a cat back. Whilst it can be done - exhaust shop mods will be required as it will only mate up to our cat/dump without mods...so for a cat back to any system that's not Ultrex - exhaust shop mods will be required. If that's of interest please email Cheers Rob

Here is a pretty lengthy clip so you can hear the system over a longer drive. Also found one twin tip system in the warehouse if anyone was keen on twin tip cheers Rob

It's currently not under development so won't be any time soon

Yep late to market but better late than never. Yeah Aus is a big place - not everyone is on the forums these days. All the best Rob

Hi Ale..... Well that's a very kind offer! Am happy to do someone who is active on here a sweet heart deal to get the word out and some more figures to showcase what it can do. We are very confident in this system.... But sponsoring a free system is not a commercial reality. Cheers Rob

Hi guys... The sedan version has only been released mid-late 2016 so not alot of them around yet. Ute version under development still and will be testing final version in 3-4 weeks. Quality of the system is as good as it gets. Cheers Rob