Process West

Looking at a new Tornado. What prices have you guys been able to get down to? Kev

I will supply any/all of my products for an indepenant test. Bring it on I say. BTW....My BF will be back on the road soon. Ive purchased an Innovate data logger. I will have it hooked up with a heap of sensors to measure intercooler performance (pressure drop, temps and a few other things). I will be taking the car to drag strip and also the circuit (the real test). Watch this forum. Kev

How I wish an indepenant comparision/test was done with the Plaz intercooler core Vs my intercooler core. If the core that Plaz uses was better I would use the same supplier as him and supply it in my kits. Time will tell. Kev

Wanna sell it?? Kev

Mate Wait a few weeks and I will have package available that will include the stage 1 cooler, ABP (around battery pipe), cross over replacement + my cold air intake. Ive got plenty of new bits and pieces very close now. Kev

Below is a pic of what needs to be cut for the air intake..(how it shoud look). Kev

Ive been bogged down lately with custom jobs. Late today I will have completed a plenum kit on a Territory. Once this car is gone my new development vehicle will be in the worshop and I will have a clear run at all of the bits and pieces I have been promising. So, there will be a few new parts coming along very soon. Kev

I have one coming. Kevin

Boost sensor/map sensor same thing. Weld a 3/8 barbed fitting into your new pipework somewhere near (before) the throttle body. Then run a 3/8 hose across to the boost sensor mount I sent you. Doing it this way means that you dont have to cut and extend wires. Kev

Just to avoid confusion my intercooler kits normally come with everything needed to connect up the boost sensor. MUZ purchased my intercooler without the piping kit. Kev

Im currently looking for a product development vehicle for Process West. What Im really after is an auto BF Tornado. Today I went to the local Ford dealer and in the showroom was this. BA MK2 Typhoon manual. 19in BBS wheels, 12k klms and has aftemarket springs/struts/sway bars. This car really caught my eye...it looks so good....but I really want the ZF 6 speed. I almost bought the car on impulse but decided to think about it for a day or two. What are the differences between the BA/BF in the Typhoon. Kev

Late tomorrow I will have pics of the complete plenum kit including the air intake and will also announce pricing. I will start a new thread in my vendors section. Kevin

Almost done...more updates tomorrow. Kevin

Compare my cooler to the stock unit. Yes, I have added the pipe below the intercooler but I have also deleted the factory rubber hose that normally runs along the top of the stock cooler. Kevin

I can sell you a 450 x 450 x 102 (core size only) but it will require a little bit of metal cutting and I can also supply a piping kit to suit. Kevin

Group buy is now over. Thankyou to all of those guys who were part of it...I had 13 units sold. 7 or 8 guys already have theirs and the remainder will be shipped on Teusday 27th Feb. Retail price for the stage 2 intercooler kit will now be $1150.00 Kevin

1 day left to get in on this group buy. Kevin

[quote name='O2STOCK' date='Feb 20 2007, 10:12 PM']What is the price for just the cooler (for a nispro style intake) How is the plenum going any ideas on cost. Would very be interested in purchasing the cooler and plenum in one buy if this saves $$ payment avalible asap James [right][snapback]499137[/snapback][/right] [/quote] James Ill send you a PM. Kevin

Bump 4 days left to get in on this group buy. You will never buy a cooler like this at this price again. Kevin

Testing (on 3 different cars) has shown no over boosting problems and I havent had any of the guys that have fitted one report any problems. Kevin

[quote name='Dagabond' date='Feb 16 2007, 01:54 AM'][quote name='Process West' date='Feb 13 2007, 09:47 PM'] I hate to give a time frame but I should have it ready in about 3-4 weeks. Its all prototyped up and we are writing the CNC program now. Ill will post some 3D CAD pics when we have that part done. Price wont be over the top Kevin [right][snapback]496895[/snapback][/right] [/quote] Bit lost here Kevin your writing the programme but you've got a 3D CAD drawing why not CADCAM it.... 5 seconds work. [right][snapback]497595[/snapback][/right] [/quote] We are...its done on Mastercam...just trying to make it sould simple for the those that dont know what Im talking about. Kevin

Rob Ill look into the second row of injectors. But from what I see around here and talking to various tuners plenty of (smooth) power is available with 1 set of injectors. Thanyou for the offer to lend me the car. I already have a readily available test mule but will keep you in mind. Kevin

[quote name='Evil F6' date='Feb 13 2007, 10:48 PM'][quote name='Process West' date='Feb 13 2007, 09:47 PM'] I hate to give a time frame but I should have it ready in about 3-4 weeks. Its all prototyped up and we are writing the CNC program now. Ill will post some 3D CAD pics when we have that part done. Price wont be over the top Kevin [right][snapback]496895[/snapback][/right] [/quote] Just tell them 2 weeks Sounds nice. I'm pretty sure I'll be on the phone in the next day or so grabbing the new cooler kit for the F6. Can't wait to see the plenum. I guess it will have the TB at the front of the plenum like say the Nizpro unit? [right][snapback]496918[/snapback][/right] [/quote] Yes, the throttle body will be where the air box used to be. Kevin

[quote name='CSV_LS1' date='Feb 13 2007, 09:39 PM'][quote name='Process West' date='Feb 13 2007, 09:17 PM'][quote name='koppers' date='Feb 13 2007, 06:32 PM']I would just like to say that after installing this intercooler kit, and gutting the di filippo 3inch exhaust system cat, we picked up 51.5kw's at the wheels on the existing custom tune with previous mods. This was actually with a less aggressive tune with 3-4 degrees of timing taken out. I'd like to congratulate you Kevin on a fantastic product and wish you the best of luck with your company in the time to come. [right][snapback]496793[/snapback][/right] [/quote] Thankyou for the positive feedback... Now you need my soon to be released billet plenum...its going to be very nice....watch these forums. Kevin [right][snapback]496878[/snapback][/right] [/quote] Now this will be interesting. How soon is soon? What price range are we looking at? [right][snapback]496892[/snapback][/right] [/quote] I hate to give a time frame but I should have it ready in about 3-4 weeks. Its all prototyped up and we are writing the CNC program now. Ill will post some 3D CAD pics when we have that part done. Price wont be over the top Kevin

[quote name='koppers' date='Feb 13 2007, 06:32 PM']I would just like to say that after installing this intercooler kit, and gutting the di filippo 3inch exhaust system cat, we picked up 51.5kw's at the wheels on the existing custom tune with previous mods. This was actually with a less aggressive tune with 3-4 degrees of timing taken out. I'd like to congratulate you Kevin on a fantastic product and wish you the best of luck with your company in the time to come. [right][snapback]496793[/snapback][/right] [/quote] Thankyou for the positive feedback... Now you need my soon to be released billet plenum...its going to be very nice....watch these forums. Kevin