Process West

Your car is FG?... PW FG stage 2 needs cutting. PW BA stage 2 does not need cutting

"The bar and plate core was sourced from overseas, has internal offset fins, so is up with usual type being offered" Not quite...the bar and plate core you have is very open in its fin configuration. Below is a comparison with the core I use (on the right). When I order intercooler core I specify a very dense fin configuration...it costs more but it works :-)

who is your tuner ?...has to be more to it.

Don't ignore the data....one cooler is not slightly better than the other...it's a total smack down...I knew what the result of this back to back test would be before it happened....many many tuners over the last 5 years or so have been giving me plenty of feedback :-) If you are on the fence about which cooler to buy...buy the tube and fin....I will send you my product at no cost...have your tuner back to back the two.....if the tube and fin performs better send my product back and I will pay for the tube and fin product....ask the tube and fin fella if he will offer the same guarantee. Kev

PW stage 3, Plaz 1000hp....B series

Welcome to the forum Tuner involved is doing a full write up in the next day or two. Pic below shows comparison of intercooler outlet temps. 498 to 533rwkw...bolt off bolt on.... Results are nothing new to me :-)

Not after you see the back to back, totally independent data that was collected in a Melbourne shop tonight....more info soon ;-)

hmmm....I had better let my 20+ active dealers/tuners know that their feedback over the last 5 years is all wrong :-)

Back to back test my bar and plate against any tube and fin....difference in outlet temps (and power) is not a little bit....it is night and day.

I will buy it

My 2 cents...Be wary of marketing that is better than an actual product ;-) Call some reputable tuners and ask what they think of in tank systems for high hp applications :-) Kev

I have some currants in stock if anybody is interested...4.50kg