dalts

Thanks spiro and thanks for the use of your slicks it's much appreciated! Cheers lee

Thanks ben looking forward to seeing yours go down the strip!!

Lol thanks Julian I think it was at 34mph aswell lol

Cheers Alister,bring on the cooler weather!!!!and a better 60ft!

Thanks trav,I think it will go very close!

Cheers ben,considering only had one run I'm happy with how it went..there's alot of room for improvement in the launch which obviously will get me close to 9s!! Cheers lee

Hey guys just got home from the track was mixed nite!! Had a few issues 1st run went up in smoke and run was aborted! 2nd blew the cooler pipe in the burnout so put it in reverse and backed out. 3rd run blew the cooler pipe on the launch so rolled through for a 21sec pass!! 4th and final run all went well ran a 10.31@135.15 with a 1.58 60ft,theres definatly a 1.4 60ft and a 9.9-10.00 in better conditions, but after the nite I had was a little gun shy on the final run!! All in all happy with how it went really need to get andra approved so we can get a few more runs with out being booted!! Bigs thanks to all the boys who came out and helped me fitting the slicks and runners and for the great support!! (Paul from elite,dad,chris,Rapidchris,Jt,Dan,jono thanks very much) Cheers lee

Wednesday nite mark if the weather holds up!!

Cheers ben I hope so too,I just want to get a run in not overly worried on what it runs..low 10s would be nice!! I have a cage booked in to be done soon,so then we can play with the set up and not worry about getting booted all the time!! Tell your bro to come over and say hi if he comes out!! Cheers lee

Yeah it's a built engine nothing special just rods,pistons and oil pump gears!! Finished installing the heater and gauge today,just got to fill the bottle up tomorrow and we,ll be ready to hit the strip!!

Cheers *Beep*! I'm hoping for a 1.4-1.5 60ft so there will be a fair bit of strain but ive upgraded most of the driveline so let's cross the fingers. Cheers lee

Thanks trav!! Anticipation is killing me lol!! Haven't run on slicks before so I'm interested to see how it all goes! Will keep you posted!

Cheers mark! Quick update!!!! Ute made 460rwkw at a recent dyno day,it was wheelspinning like crazy And due to my fault bottle pressure was too low so afrs were too rich like 10.2:1!!! I just received a few extra goodies this week like nos incabin pressure gauge making monitoring pressure a lot easier,also a bottle heater to keep pressure constant!! At this stage weather is all good for wednesday so we will be hitting the track!! Cheers lee

I know we were pumped to go,had the slicks and front runners loaded up!! Next week hopefully! When are you heading to the track your oh so close to running 10s??

Yeah Paul from elite will be out with me so hopefully he will get it on tape!!

Unfortunately Willowbank has been rained out tonite!! Had the ute already to go,so we'll have to wait until next week

Thanks for your help yesterday boges was much appreciated!!

Bloody iPhone keeps repeating posts!! Ben,my computers in getting fixed at the moment,pm me your mobile and I'll txt it to you Cheers lee

Cheers it was a stinker in the workshop today,going to the rdp dyno day on sat I reckon it will run more should be a little cooler!

Double post

Cheers mic,I always wanted 600rwhp we put new plugs in with smaller gaps and a little more timing which did the trick!

Cheers mic,I always wanted 600rwhp we put new plugs in with smaller gaps and a little more timing which did the trick!

Cheers mic,I always wanted 600rwhp we put new plugs in with smaller gaps and a little more timing which did the trick!

Cheers mate! Will definatly need slicks for the strip this time the radials won't cut it,very interested on what times it will run Low 10s should be close to the mark!

Quick update Played with the nitrous tune today ended up making 455rwkw(610rwhp) very happy considering the heat up here at the moment! Will head to the strip in the next few weeks to see what times we can run!!big thanks to Paul from elite for squeezing me in.