BFHOON

here look. im only aiming for 400rwkw but it will be detuned to 400 for safety.

when the new donk goes in I will be probly fitting that etm manifold and 5 inch dump with external waste gate. I will start playing with exhausts after that. the manifold will be mainly for looks.

havnt yet had it tuned, iv put a new intercooler kit and this cat with centre muffler removed w/gate mod. im getting a surge tank and twin 044`s from cv performance then they will retune. im using a boost controler to keep under 12 psi untill I get a retune. as for other mods. deka injectors full plazmaman 800 kit with hot side pipe and airfilter in the inner guard. mal wood opt 3 full kit with braded lines and alloy csc and lightend flywheel. 5 icnh hurri cat on the stock system with centre muffler removed, soon to add surge tank and pumps valve springs and an atomic bottom end.

has anyone heard anything about these hurracane cats. iv got the 5 inch one on my standard dump and it seems to work as expected, overboost I was also impressed with there production plant and the guy working there chev has the exact car as mine bf xr6t in fantasy.

may have some trouble fitting the terry turbo kit on a phoon.

in my opinion he would be best off chatting with nizpro about his project and work from there.

xhDVVIzdsqA WARNING MAY CONTAIN DRUG REFERENCES AND STUPIDITY.

http://www.fordxr6turbo.com/forum/index.php?showtopic=41091 get this and a 5 inch cat with centre muffler removed. and a retune.

neutral colour spirit also known as neutral cane spirit. costs about 1 dollar a litre from csr. 99%alcohol.

in addition to his question I would like to ask what people are using for data logging. im in the process of getting the scantool software and interface at the moment. its nearly the same cost as upgrading to an xcal2 (capa) can anyone shed some light on the differences between the two. if I get the xcal 2 my tuner can put in my custom tune as its stored on file. is this correct.

I run the testing lab. between me and the blender I trained we both look after the quality controll and relevent paterwork dealing with customs.

its a hard job but somone has to keep the aclohol flowing.

the great wall of bourbon. helps heep the rabbits out.

6qFs3k_KhF0 wheres the f*cking cheese.

that's what they will be saying tab. it oftern runs in 12 year cycles so we are due for a nother recession just based on historical info. the liberal stooges will be saying look see what happens labor gets in and we have a recession. but its the recession we had to have delayed by the mining boom.

there are people parked under the brooks road overpass stopping traffic. its over the xroads now.

im getting reports of a cell of hail medim sise heading over minto towards granville.

I remember headsex covered the topic in his only as good as your tools thread. click

or a melted cat.

the news iv heard from a good source is thet the next 2 first tuesdays of the month will come with a rate rise. that along with the banks now having there restrictions removed in my opinion will see >12%by this time next year.

one of the attached vids is the hba add. the last kid is the best one.

do u have any timing ajustment. if so pull out some timing.

the event organisers should be responsable not the driver.