rad
-
Posts
48 -
Joined
-
Last visited
Everything posted by rad
-
hey Matt did ya find some headlight covers yet manual too I see..........you like
-
no mods,but mine are +30 on the rear
-
pics of the front
-
yea something a bit different with the yellow brakes and badges I think it goes better with the silver . spoiler is painted,wanted to try something a bit different to make the F6 stand out from the XR6's so did the front as well,its only paint so I can change it back later if I want. used about 2 1/2 cans for the wheels depends how thick you want it.......was just a trial to start with but its lasting pretty good
-
yes,yes,3 cans 3 coats been on about 3 months no chipping or marks yet just took the wheels of gave em a good clean and sprayed,after they dryed peeled of the plastidip from the tyres and that was it. actually asked my painter about painting the rims when I got the front painted and he asked what it was and to keep it on though they are a little harder to clean being not so smooth now.
-
before plastidip
-
mine cost $400,I think its a flat rate. It would pay to do all ya mods then get ya cert as each extra mod after ya cert is another $400. certifier near you
-
has nizpro injectors 044 pump,did score a process west surge tank off t/me but haven't fitted it yet. most of the engine work was done by the previous owner and got the capa 1 flasher so if I do the dump I'd have to buy a new flasher plus tune so for the gains I'd get for the dollars spent I don't think its worth it at the moment?
-
craig here from taupo 05 lightening strike ba phoon 400kw......well its really 399.6 at the wheels atomic motor/turbo (fat rods,forged pistons,girdle on mains) nizpro plenum & cooler ap racing brakes mal wood clutch mgw short shifter wolf rims aps 3.5 exhaust standard dump coil overs whiteline sway bars.
-
that I will big guy see ya at the AGM
-
that I will....bring the old video camera as well.
-
its gona be a short sunday drive then..........I live in taupo I'll be definitally coming out for a looky
-
which track you going to ? might take a sunday drive to have a looky
-
looks sweet,how about pics of the the rear
-
275/35/18 with 245/40/18 on the front similar rolling diameter apparently.
-
9.5 + 30 with 275 tyre on rear with rolled gaurds. 8.5 +27 with 245 tyre on the front.
-
wanted a ute but the twins wouldn't fit so got a wagon,fold down the rear seats and its sort of a ute :sungum:
-
I've got XYZ coilovers in my ba phoon and as been said you can go very very low if you want. and for the price the are sweet
-
have you checked the sway bar mounts? mine had come loose where it connects to the control arm and was making a knocking noise.
-
could be the CV's
-
I put sl king leafs in my au wagon (I think same set up as the utes) then put some 30mm blocks in as well as wasn't low enough for me. have 17" bf rims and have about 15mm clearance from wheel rim to bottom shock mount so with 16" wheels would be a close fit. I don't see a problem using blocks as long as they have the right locating holes
-
-
-
From the album: radars
© © FordXR6Turbo.com
-
From the album: radars
© © FordXR6Turbo.com
-
From the album: radars
© © FordXR6Turbo.com
