Silverfox666
-
Posts
117 -
Joined
-
Last visited
-
Days Won
1
Everything posted by Silverfox666
-
Paint Code For Bf Dark Agents
Silverfox666 replied to FiftyOne's topic in Interior & Exterior Workshop
The colour code is 6BAH FORD AUSTRALIA DARK ARGENT MET -
Time to change the cv's in my car so What replacement shafts are the ones that are going to work or is the genuine ford ones the only way to go ??? Are the repco cv shafts any good ????? There for an FG F6 Cheers
-
Ok we went for a Harrop / Eaton true trac , apparently it's a bit stronger than a standard eaton true trac , it's ordered and should be at the workshop tomorrow with any luck , new gears and bearings to go with it
-
What about reliability with the true trac has there been many breakages ???? And they are heaps stronger than the standard M86 centre aren't they ????
-
Yeah street car mate , the mechanics rang the diff place and that guy swayed him towards a KAAZ and was singing to know what people with ford knowledge thought
-
Just about to get a true trac diff put in my Fg f6 and my mechanics are telling Me I should go a KAAZ diff centre What's everyone opinions and which way would you go ?????
-
I ended up going the KPM MOTORSPORT intank 1000hp pump And will sell my 400lph intank pump and Plazmaman surge tank so the KPM item once all said and done would have cost me about $800 And the good think Is I get rid of a 044 buzzing away under the Passenger floor LOL .... Thanks for the info I didn't see your post till just now or maybe I would have done it that way but the KPM is already in my hands
-
Here is my New fuel pump set up ????
-
I was told that they will as my car has coilovers and its low , it will be easy for me to raise it a bit if there is a problem , I should have them on Monday and I'm using the MT ET STREETS in 275x40x17
-
I have these coming as we speak project D Spec E 17x9 +35 5x114.3 and they fit over f6 calipers
-
I just brought one of these 1000hp pumps , will post pics when it turns up ...... Now I will be able to get an e85 tune I'm 393 RWKW on 98 I'm hoping for 450 RWKW on E85
-
I live in Penrith Western Sydney bud
-
Where in sydney is everyone buying there MT ET radials from and how much should I expect to pay for 275x40x17 's for a pair ????
-
Is anyone running this set up at all ?????realworld Feed Back would be great ....
-
Ok please PM me prices KPM MORORSPORTS
-
Ok so if I go a PW duel pump surge and a reg fitting kit to my standard rail and a DW200 in the tank than that will be suitable to get the E85 tune ?????
-
Oh ok sorry got it now I'm on the same page now LOL thanks mate
-
What would you suggest GUN-808 ?????
-
I was advised on a walbro 460 in tank pump is the DW200 similar ?????
-
Ok thanks for the replies , 17x8 BF rims it is then .... Again thank you
-
Don't you have to change the intake pump to a e85 compatible one or is the 400 LPH one I have in there ok for e85 ?????
-
I have a 393rwkw set up on 98 Fuel , my car has a Plazmaman surge with single 044 and ID1000 injectors and a 400 LPH intank pump and standard fuel rail and reg , I know I need a walbro 460 E85 compatible pump in the main tank but what else do I need to change or add to allow my car to be tuned for E85 ... Cheers
-
Is it the ford 17x 7.5 steel rims that everyone is Using for the mickey Thompson 275x40x17 ET radials ????? Just want to make sure I have it right before I buy them and find out they don't fit together ??????
-
Ok I will make sure I get new gears while I'm at it , it makes sense
-
Oh ok , so do you suggest when I get the true trac installed I should get a new gear set also and for them To make sure they correctly set the mesh ???, I know they are replacing the bearings as well
