Jump to content

kane86

Member
  • Posts

    9
  • Joined

  • Last visited

Reputation

2 Neutral
  1. I'm guilty of both leaving tc on and doing a burnout when I wasn't supposed to, not in the same run though. I thought he told me to skid but he was actually telling me to wind up the window
  2. kane86

    New Members Thread

    Is yours a ute or sedan? I'll be running et streets, ran 14.1 at 106mph so far with no mods. I'll definitely be looking into one of those pumps. I want to do as much as I can myself mainly for satisfaction
  3. kane86

    New Members Thread

    Any dramas with the walbro? I like the idea of replacing the stock intank unit. What tires were you running to get into the 11s?
  4. kane86

    New Members Thread

    Probably more worried about drag days where it'll get flogged for the whole day I want the fuel system to keep up. Anyway, I'll work it out
  5. kane86

    New Members Thread

    True but I'm not too stressed how hard she drives it as long as she doesn't damage anything. Plus with heathcote only 20 mins away, it'll be seeing a lot of the strip and I don't really want to be carrying a full tank down the quarter every time
  6. kane86

    New Members Thread

    I doubt we will take it any further than 320ish or whatever is good for an 11.99sec pass. Not sure what to do, keep researching I guess and maybe give pitlane a buzz. Need to take her driving style into account too
  7. kane86

    New Members Thread

    Its actually my wife's daily but she has a heavy right foot. Would hate to see her with 440rwkw. 1 more question on daily drivers, how do bocsh 044's go for every day driving including 100km trips up the freeway? Or should I start a thread?
  8. kane86

    New Members Thread

    Thanks mate. The knob who had it before me put a monza cooler on it so mainly want to get rid of that. Only aiming for 280rwkw as its daily driven and does a fair few kms so was even contemplating a capa cooler (on a budget due to house renos aswell)
  9. kane86

    New Members Thread

    Hey people, my names Kane. Won't be posting much because all my questions have been answered somewhere in this awesome forum. Anyway I'm from the Bendigo area, just bought a white bf mkll ute and so far doing the oil feed line and zf heat exchanger and service. Got 60lbs injectors and 12psi actuator on their way. Still deciding on what cooler and exhaust to use but once I do I reckon I'll put it on the trailer go for a drive to Frankston
×
  • Create New...
'