Jump to content

obsty

Member
  • Posts

    26
  • Joined

  • Last visited

Everything posted by obsty

  1. I have a complete set that I was thinking of selling
  2. Happy Birthday obsty!

    Read more  
  3. "high flowed cat" lol
  4. the car was all done by the tuner and havent had a problem until recently
  5. so it could be the actuator? too soft?
  6. its weird because when it happens and you back off and then accelerate again its fine.Had engine rebuilt and problem only started about 4000km after. Did you have to pull turbo back off to find problem?
  7. hi I have a bf which has 360rwkw.it boosts normally most of the time but every now and then it will only boost to 5-10psi then only hold that.And also there is some times a rattling noise from turbo side during this problem. the turbo has been ported and actuator changed, all bolts are tight any help would be grately appreciated
  8. do you know if ba and bf coil packs are the same?
  9. go to a place that have a global jig setup, they are the best system I have seen and your car is bolted to the rack and all measuring points are bolted
  10. who was that in the white xr6 t with the quads?? what exhaust do you have its loud as?
  11. 1/ marco 2/ bloosted 3/ jet 4/ tuffxr6t 5/ rsk 6/ xrsikk 7/ rapid ford 8/ tyfoon 9/ fcdfed.. im in.. gotta bail at 10 though.. promised a mate I'd go c him dj
  12. 1/ marco 2/ bloosted 3/ jet 4/ tuffxr6t 5/ rsk 6/ xrsikk 7/ rapid ford 8/ tyfoon 9/
  13. mine is $1500 and $600 excess and im 22 on a Bf typhoon, only thing is im not allowed to modify.HAHAHA
  14. are many of your members going on it?
  15. just seen on FF sasma has one on starting at 7 at TTP, would be good to get some numbers from here down there
  16. hi trying to organise a cruize for friday night, just trying to to see how many interested, starting from tea tree plaza at 7
  17. haha I told him to buy one but the insurance was too dear
  18. THANKS ALL ILL LET MY MATE KNOW
  19. wondering what is the best things to do to a N/A Ba Xr6
  20. Hi just looking round for a job, im a 3yr panelbeating apprentice and have just been put off due to buisness closing down, will move interstate if I have to
  21. 20yo with xr6t ute $1600pa
  22. obsty

    Missfire

    changed fuel filter but did nothing, would valve springs cause a miss
  23. obsty

    Missfire

    I gapped the plugs to see if it would change any thing and at did improve slightly
  24. obsty

    Missfire

    how can you tell if its valve springs?? I dont really want to pull it apart and find nothing wrong with it
  25. obsty

    Missfire

    the car is standard except for middle muffler taken out, and the plug gaps are .9
×
  • Create New...
'