Ralph Wiggum

I had plans to, but given how cheaply than can be bought for it's probably not worth the effort too be honest. I don't have the free time I used to so will probably just buy a low mount deal from actiondan

LOL Im going through the same at the moment. Every applicance installed when the house was built sysmtemically shit the tin in a short space of time. and light globes...don't get me started on fucking lightglobes.

Shannons worked out the best for me. Wound up moving all our cars and house over.

Im hoping by then it will have welds on the manifold!

I'll have a look when I get home mate.

I'll have a look when I get home mate.

I don't own one anymore. GTX3576 will do what the GT3582 did anyway, especially on E85. Would be a good excuse to throw a 100 shot on it.

What's the water like where you are? Our water is quite hard and I was underwhelmed with results from our Dish Drawers. We changed to a dishwashing tablet designed for hard water and it's been apples since. I don't rinse anything before it goes in now.

Iv'e been offered free Accom down there and I know turboknapp is keen. So I'm at about 80% at the moment. *100% if taking Kyles ute. Ang's cousing runs an 8 car(ish) Transporter doing port to dealer runs. Im going to see if he'd been keen to transport 4 or so cars down there for the weekend. If it pans out I'll let you know.

17 to 20nm

I'll like when he posts some pics of it in use. Im more inclined to like this post since he's clearly putting some heat in those rear discs to have them seize every 12wks. Skids much?

Pics?

You must be starting to wonder if you're the reason?

Have you ever actually done it Kieth?

If you need a puller you're doing it wrong. Gentle heat in the right spot and a couple of shots of Freezing spray and they fall off.

Daily's getting some love now the F6 is back in one Piece. It's got 230k KM's on it and still has the original discs all round. Im glad I've got a new set of front hubs here as the Discs have become one with the hubs that are on there now. It's going to be a riot getting the rear discs off the adjust the handbrake. Also got my $'s worth out of these pads......

1.1 will be fine if your coils are healthy.

I drove home from the plex one night on some rag cord Hoosier dot slicks. 1/7wnb

The Gnome.... WTF

I used to use the same pedders. I stopped after the car arrived home from a wheel alignment with a crooked steering wheel and a "click" in steering just past centre. Turns out the guy that did the alignment had loosened the wheel in an effort to straighten it after the alignment, then realised the wheel to column is a tapered square so it only fits in 90deg increments. He forgot to re tension the bolt securing the wheel. I could live with that as it took less than a turn to be tight back up to spec. What pissed me off was a a flat out denial that they where involved in the wheel being loose. I rang them and gave them the heads up as it wasn't the usual guy that did my alignments but they where not interested. I wasn't expecting anything from them either. Pretty sad as id been going there for a long time and had spent a decent amount of coin there and recommended others go there as well. Kyle, if you need an alignment go see Dean at tyre power tell him I sent you. Also change to a 19 or 18 wheel and the front will improve.

It'll work great for circle track racing. There's only a couple of mm in it so not likely to blow the car up.

I'd rather extract each of my nasal hairs with a pair of long nose pliers whilst snorting bleach than spend anytime on AFF talking about anything with those one eyed Donkeys (and I own 3 Fords) FACT!

That thing should be back on the road soon......poke poke @turboknapp

I remember that cruise.