Ralph Wiggum
-
Posts
19,332 -
Joined
-
Last visited
-
Days Won
310
Everything posted by Ralph Wiggum
-
327 Rwkw 760Nm Xt One Tonne Ute (Was A V8)
Ralph Wiggum replied to genuine honest person's topic in 300+ Club
.35 percent is POINT35 percent. 35 percent is 35 percent. Barnz = worst kieth ever -
327 Rwkw 760Nm Xt One Tonne Ute (Was A V8)
Ralph Wiggum replied to genuine honest person's topic in 300+ Club
.35 percent? that's rough. 35% would seem reasonable? -
If I could turn back time I'd run stock all day I'd take back those cams and retainers and wouldn't have to pay I don't know why I choose what I did I don't know why I went that way Cams like a mountain, the heads cut deep inside Cams are so lopey, they stall sometimes best I got at short notice.
-
^WHS Real world experience right there fellas.
-
The Custom Paint Job Thread
Ralph Wiggum replied to The Kerb Warrior's topic in Interior & Exterior Workshop
-
I expect my car will be in bits that weekend but it might not be a bad shake down run for @turboknapp and the blue meanie
-
Messing with peoples PM's etc is not on. Hence my level of pissed offness. If the perp wishes to contact me to discuss why it occurred we might take a lenient line otherwise it will be a permanent ban.
-
Rest assured last night's antic's are going to result in whoever was responsible not being welcome or allowed back.
-
Midgies/Sand Flies/Little Flying Bastards. Got mauled by them at night whilst I was onsite the week. Currently scratching like Tyrone Biggums. "y'all got anymore of that stopitch?"
-
Revs dropoff when pushing in clutch at lights.
Ralph Wiggum replied to frankieh's topic in XR6 Turbo
Tune needs adjusting. The car can infer neutral from road speed so doesn't need a clutch switch. Do you have a tuner? If not I can sort it out for you with HPT. -
Tim to verify the oil pressure with a decent mechanical gauge.
-
Did you remove the factory filter screen when you installed the earls line?
-
FUSU
-
Everythread involving Kieths car- Any Member - "Car running yet K3th" Keith - "No" Any Member -"you should pull your finger out" Keith - "Can't for XYZ reason" Any Member - "it's easy just do XYZ" Keith -"Can't be fucked" wait two weeks, repeat.
-
What fluid? and was the fluid level set as per the ZF procedure?
-
Nah only there babies these days- choochoomuthafucker
-
I've decided im now going to measure my rim width from lhs outside to rh outside. I'm running 90.5 inch rims.
-
Im still struggling with 20x11+38 being 15mm away from the gaurd....
-
I did a thing on the weekend, then forgot to post about it. - and then I did another thing (6 times) and forgot to post about that as well.
-
20's are clearly bad luck, need to get rid of ASAP.
-
Solution seems obvious...
-
Legit question, Im just interested to know. Not looking to offer advice/criticism
-
What did you do?
-
What offset are the wheels?
