StevesXR6T

I managed to install mine without removing the ICC it is a bit of a mission to get your hand up there but it can be done from the drivers foot well.

Thanks Guys

Thanks guys feel much better now. I have bought a termo fan to go on it anyway because in stop start traffic it starts to creep up a bit higher. ebay thermo fan This is the link to the fan I bought its size makes it perfect to fit on the pwr cooler and if you are limited for room like I am it is only 55mm deep in the centre.

Thought I would post up some pics of the T's that we used for wedding cars. I would like to give a big thank you to jcooke for helping us out on the day with his car. The ceremony was held down on the gold coast at the spit. Thanks again jcooke for your help on the day it's greatly appreciated.

yeah it would be. I am hoping that maybe someone may have a temp gauge on a standard one so I can get an idea of the standard figures.

I dont know what the temps were before the cooler install I put the gauge in after the cooler

I have installed a PWR transmission cooler and bypassed the radiator completely. I have a trans temp gauge and the temp sits between 150F and 170F. I am fairly sure that the temp sensor is on the return line from the cooler so this should be a good indication of the trans sump temperature where the gauge is suppose to be mounted. Is this a normal range. Thanks

yeah I saw the pwr one on the net they are only down the road so I am going to get a price on monday but I think they will be a bit out of my price range. Thanks for the input.

Have just done a service on my T and the radiator is buggered and its leaking. I have priced a new one from ford and they are reasonable but I dont want to buy the same radiator and have the same problem in another 60,00klms time. I have looked though the forums and there is plenty about coolant getting into the trans but I do not have this trouble because I have bypassed it. But I can not find anything about decent replacements. If anyone could help me out that would be greatly appreciated. Thanks Steve.

I saw a blueprint with the boss 460 sticker on the sides of the bonnet bulge in ormeau. Is it a aftermaket package or something.

springwood