galconn
-
Posts
101 -
Joined
-
Last visited
Everything posted by galconn
-
Recommendation for suspension for XR turbo ?
galconn replied to JZaff's topic in Suspension and Handling
You could try the following combo which is good for 450RWKW+ and 240KM/h (airport runway dash): Bilstein shocks, Kingsprings, Whiteline sway bars (Front 30mm) (rear 22mm) and neoprene bushes. Add a 'true track' diff if the budget allows. -
Totally agree.
-
I hope to get to the starting line. 50:50 at this stage.
-
Caterpillar
-
Worm
-
Scarlet
-
See ya at the meeting point (Caltex) at 09:30 Dave C
-
I'm sure any move considered by Ingall will be for very good reason.
-
Ah! Yes. The smell of burning rubber brings back memories.
-
Agree, a great day out for the 'Ts' and DBOSS. Thanks to the Lord and Cro (excuse the pun M'lord) and all the crews.
-
According to my calculations there are 10 confirmed for tomorrow: Cro DBOSS Galconn Phoontastic FPV GUY revheadrobbo jp300 4runner Bugster Lord Cyric To those who will be absent - hope you all get well soon .
-
Anyone keeping count of definite starters for the cruise? Dave C
-
See you at the starting grid in Canberra on Sunday then Bugsie.
-
Are you seeking confirmation from everyone who has committed thus far to the Sunday outing? If so, I'm still in. Pity about your back Buf-Phoon, hope you get to the starting line. Dave C
-
You may want to try a few pressure settings before deciding on what best suits your driving style. I run 38 front and 34 rear (psi) on Michelin PP2 (245/40/18).
-
Thanks Dingah, The Cotter Road/Parkway was errected today so can only guess that it will be operational sooner than later. The location is not surprising, after the overpass so it can't be seen when heading north on the down hill side of the parkway!
-
Yep, I'll be there.
-
Best if we kept replies to just one thead on this topic.
-
Bullrun it is. On! On! On!
-
I guess its the '30 second memory' bit and the ability to count from one to six and back again that sets the manual drivers apart from the (grandpa) auto drivers.
-
I'm one of the interstate customers of Nizpro, so for me to travel 1400 KM a round trip they got to being doing something right. Don't settle for second best give Simon or Dave a call.
-
Butterfly Clearances On John Bowe Throttle Body
galconn replied to DAN682's topic in Fuel System & Induction Workshop
Dan, had the same problem with my JB unit and could not get a decent idle in over 18 months of trying everything known to mankind. Put the original unit back on and its as sweet as pie. -
You can vastly improve the ride with 30mm front and 22 rear bar plus decent set of shocks. Changes the whole handling characteristics of the sedan, including tyre wear, braking, steering and balance. Go for it.
-
PP2s @ $420 a corner. Good traction and handling especially in the wet.
-
If the tea leaves are being read correctly, then may be time to close down the FPV workshop and divert the vehicles to a more competitive business in the Bayswater area.