Headsex

[quote name='Dynowog' post='583009' date='Oct 9 2007, 10:34 PM']danny thats the point there has been no drill !!!!!! lol lol lol[/quote] LOL thats right, these are built to this spec from the siemens factory, not drilled..

Avatar's are different.. LOL but location is still my driveway And I'm not a mechanic. I work in the Aerospace Industry

I was by myself, attempting to accelerate off the lights in the wet.. first time, broke out wheelspin. backed off.. got on the pedal again, and kept in it cos it was soo slippery.. If I didnt keep into it, the cop would have just excused it for loss of traction.. Oh I dont attract unwanted attention, my car is very stealth looking.. unlike YPURV4's.... Ohh. and what cruze?? LOL I forgot to mention that I spat my engine out on saturday.... LOL

Yeah I saw him too I also Saw Fatsex in rowville

I believe yes it was...

Nice airbox.. Looks the same as Mario's from Autotechnique.. Same company must make it for G&D and Autotechnique.. Notice the boost come on slowly, and then it went up 1-2psi when it changed to 3rd gear(or was it 2nd for speed legal reasons? LOL).. Gotta love Tuners who tune in open duty.. Sorry didnt mean to be picking but 90% of people here have tunes like that

Quoting what a cop said to me "Is that the stereo system company who tuned your stereo" ... my reply "yeah, its my mates little business his trying to get off the ground.. just put it on as I dont even have a stereo"

Beyond tuners abilities for multiple reasons.. A Emission "Tuner" charge a hell of a lot more A 4 gas analyser is quite expensive, especially modern ones which simulate the test that the EPA does.. Actually, the test isnt done at idle, there's a 25km/h test and also a 40km/h test I've been looking into this of recently as I know someone whos tuning a Supercharged VE 6 litre for emissions (as well as power).. Really, this is one things that's been massively overlooked.. As soon as ANYONE flashes any tune, being generic or custom tuned is outside emissions... Easiest and Cheapest -> STD Injectors, STD Tune, STD Exhaust, and STD Airbox (no pod).. I believe the Intercooler shouldnt effect it.. Expensive and technically correct -> Car needs to be dynotuned for hours with a 4GAS.. As I dont know exactly What effects what gas in a 4 gas (I'm still learning) its hard to say what needs to be done.. and to stop them picking on YPURV4, Put higher suspension in it, remove the custom plates, and make the car look like standard Ohh Mike.. a hint, Remove the "headsextuned" sticker also.. LOL EPA might ask why the cars tuned..

http://www.dotars.gov.au/roads/environment...t/emission.aspx There you go... It shows the LIMITS of all the gases.

AFR has nothing to do with emissions.. Only the ratio of air / fuel burnt.. The emissions are tested with a 4(or 5 gas?) analysis fo measuring gases like CO2 O2 CH4 Co H2 Et0H.. Fuel mixture only plays a small part in this.. the main tricks are fring off the cat earily, and getting to operating tempreture.. this is done more via spark control rather than fuel control.. Tuning for emissions vs Tuning for power are 2 different things. Sure, you can get the car tuned, and adjust it b ased on what a 4 (5) gas analysis shows, but there's a art to tuning for emissions.. ohh and a $2800 fee to get it tested and a report generated you can throw in cops faces when you get pulled up... (ohh and if you fail the test... expect to pay another $2800).. NOX is the important gas too I believe... (oxides of nitrogen) This can be reduced by allowing more EGR... Ohh and this is what costs power.. so I'd say most tuners disable this (the capa generics do)

[quote name='SCRIBR' post='582713' date='Oct 9 2007, 09:26 AM']damn! why did a pay 'so much'?!?! I'm still harrasing my mate danny, so ill let u know about that set.[/quote] hah, you didnt.. this is a "special price" negotiated with the supplier, only for this group buy.. Individual set pricing will still be at the normal rate.

[quote name='LUMO' post='582664' date='Oct 8 2007, 10:52 PM']When is the last day for this im really interested...[/quote] Mid to late Nov based on last 2 group buys.. generially takes approx 6 weeks

Once again, its time to stir up the market.. After much negitations with the supplier, We have negitated a all time once off special price of $380 for a set of 6 injectors Thats right.. $380 for a set of 6 (availble in a set of 8 if you have a bent engine for $507) $15 postage australia wide via Platnum Postage Sachettes. (Please no pickup unless i know you personally, last set took up too much of my time) Refer to my previous group buys for information on these injectors [url="http://www.fordxr6turbo.com/forum/index.php?showtopic=30073"]Siemens Group Buy MK1[/url] [url="http://www.fordxr6turbo.com/forum/index.php?showtopic=34522"]Siemens Group Buy MK2[/url] Thats almost 250 injectors sold Via the 2 group buys. Not 1 failure / complaint. Various workshops also purchase and use these injectors from the same supplier with good results. 12 month warentee available, from a supplier which stock IN australia. Specs: Deka IV, 660cc, 12ohm, 30degree Cone Spray Pattern These are a direct bolt into the XR6 Turbo engine - CUSTOM TUNING REQUIRED (please, dont expect to buy these and fit them yourself and expect results, your engine will be flooded with fuel, and foul the plugs) You know the drill.. Add your name to the list.. Please note, This group buy is also running on fordforum.com.au(My Nickname is the same).. Both lists will be maintained seperately.. So if your already on the other list there is no need to add your name here, both will be closed when the combined effort reaches approx 150 injectors (25 sets) You know the Drill.. Put ya name down if you want a set. [attachment=33074:DSCF1107r.JPG]

Fark.. I'm Famous

Wonder if Turbo Territory CV's are bigger / stronger / able to be modified to fit.. Should explore that option

I once looked into importing siemens, in quantity of 120 for $37.50us a unit, But, but the time you add Freight, 10% Customs, and 10% GST into it. its hardly worth the hastle.. Even making payment internationally was a hastle.. and Hoping they come is another thing. I hope you've taken gst and duty costs into account when coming up with your final price..

[quote name='Adrian6T' post='578076' date='Sep 25 2007, 12:12 AM']Why dont you ask for a bigger discount for alot more sets? I could be interested.[/quote] Seriously. Dude? do you want a free tune as well? Less than $75 per injector is a BARGIN! When you can buy injectors from ebay for $450, How many people do you think are going to wait 2 months to buy a set of injectors to save $50 I remember the days when people were paying $700+ a set for Bosch 42lb Injectors

[quote name='jetute' post='577312' date='Sep 22 2007, 08:20 PM']I dont know the part numbers... I have a set that I have bought through HS but dont remember what the part numbers are... am sure you guys have done your research... was merely just pointing out that there are different versions out there. I was going to buy mine off ebay first but pulled out as I was not confident of the injector. 107961 does ring a bell though but I just cant remember for sure anymore!! cheers[/quote] There is only 1 siemens 60lb injector, the 107961, which gets rebranded to the other makes. People speculate the specs change, but this is not the case. Siemens have a unique look, and any injector that looks the same, and is rated at 60lb is a siemens injector... Mototron, MSD, Edge Products, RaceTronics. That ebay seller IS the source of all these injectors. Hi-Flo sell all sorts of diesel products they import from the states, and it just so happens these injectors are one of the products that "edge products" sell, which, by the way is now sold as MSD injectors (sure, you thought they only sell ignition products)

there is no such thing as fake siemens. I garentee all siemens in australia is coming out of the same diesel shop.. I got them from there, HPF get them rom there, C&V get them from there.. Heck, they even sell on ebay.. If you look carefully, you will see that they have another marking on them, A Branding, But they have been coloured out with black pen.. Edge Products.. which is MSD.. There has been no such thing as "fake siemens" anywhere in the states.. The rumour was only started here on this forum (google it, i garentee you). Either way.. 6 for $395... His making nothing on it, and i would assume his aiming for 90 injectors before the group buy closes

Yeh, fatz was being a *beep*, I wouldn't have her as a myspace friend if I didn't think she was worthy

What? There's lesbians there??

You serious? I've met 2 people from here who are emo...

OP I'll go say hello tomorrow night

Mr Man.. Line up those Aeroplane Blondes We're coming to bendigo!

Not saying she donthave a bllack box, just saying she aint a airplane blonde