jonnyd1986

$3600 Would get you 300rwkw. Cams, Pushrods, Valves, Double row timing chain and over the radiator intake. that's with stock exhaust. 310wrkw with twin 2.5" cat back for extra $1500 (average price) 330rwrkw with 1 3/4" extractors to 3" high flow cats and 3" cat back $3000(average price) on top of the cams price. So with around $6600 would get you 330wrkw. Fastest cam only VE SS is GM Motorsport's VE SS Cam Only 10.87 @ 128 mph with drag tyres. Jon

To give people an idea. The new VE SS's with the L98 6L V8 the are getting on average 270rwkw (some people in low 12's 1/4mile or less) with intake, full exhuast front to back and tune with the manuals. Add a baby cam to that and you'll be looking at 320rwkw (11.XX 1/4 mile). Jon

true

I'm 19, and I've saved up 33 grand. I'm looking to buy a house or a wicked car like a new XR6T or WRX STI. that's when I get enough money but. :/ I think the house would be more of a wise choice but I can wait to get a new car!!!!! I am driving my parents 1987 300D Mercedes at the moment. that's the 3 litre 5 cylinder diesel. 0-100 in about 20 seconds. Yeh its a bit too fast isnt it?!

Thanks for all replies. I'll probably look at getting the GFP StealthFX, because you can adjust the noise level. Thanks all Jon

What blow off valves would fit the XR6 Turbo? Or Do they all fit? Mainly for the sound they make. I dont have a XR6 T... yet but just looking at things I could do with it when I get one. Thanks Jon

accually its prob a scam

Nah doesnt look like a scam. Its a real deal people. I should buy it and sell it and make some money. :D

Hey Dazza, Is that your XR6 as your avatar? Do you have a bigger pic of it? What is the price of range of 19" wheels and what is the price range for 19" tyres?

So 19" X 9" would fit all round? What would fit all round without any mods?

Biggest Mags that you can fit on a XR6T? And whats the size/spacing of the studs? However it is measured. Thanks JOn

I assume you are talking Utes.. that's damn cheap for a sedan.. <{POST_SNAPBACK}> Hey Grass, I live in Gingin and we have a Lettuce farm, about 24 acers of irrigated land. I am in parntership with mum and dad since last year. Not bad work and flexible hours. So 40.5k for a new Mark II XR6T Sedan? :w00t: Where from man? What dealer? Jon

I reackon the normal XR6 wing is the best it sits lower to the boot which makes the whole car look lower. But is you have lowerd your car allready any would look ok. Jon

I think you'll find its the type of handbrake it is. Alot of the old cars with drum brakes at the rear work the same as if you were putting on the brake but only locks up the rear. Some of the newer cars might have the handbrake system that locks the driveshaft which might make a clunking sound. Our old landrover used to have one of those handbrakes that lock the driveshaft and it made a clunking sound as it grabbed and released when you pulled the handbrake up before you stop. Dunno mate.. just a Thought. Jon

Yeah sounds good Bain, I'll look into 'demos' might find a bargan. So around June 30th there should be some good 'run out' deals on ey? Jon

Oh cool, I am definataly getting the premium sound package then! Dont think I'll need the extra stopping power but I do like the Brembo's red calipers! Makes it look mint! Jon

Really 51k For a typhoon xr6ikness? Nice.. but getting a bit expensive. Oh the nearest dealer is an hour away... manybe next time I go down to perth. :/ Do all the Mark II XR's come with the center TFT display thingy or is that come with the Premium sound? Thanks!

hmm doesnt sound good :/

Wow nice deals Bain and jetute. Do you guys reackon the prices will drop even more when the Mark III comes out? That would be the best time to buy one wouldnt it? Is there gonna be a Mark III? What is going to be different with it?

A few questions... Just wondering what is the lowest price of a new XR6 Mark II Turbo Manual you have seen? Also would you be able to get thew F6 Typhoon rims fitted onto the XR6T as an option? Or is it better off getting the standard rims and selling them, then buying another brand for cheaper from a mag shop? When you get the brake upgrade for the XR6T do you get the red Calipers? Thanks for all replies! Jon

Looks wicked! Great angles. :D Jon

Nice, yeah they probably dropped the price down to get rid of them because the Series 2 is out. No one will pay the rrp of a Series 1 when they can get a series 2 for the same price. Jon

the manufacturer claims accuracy to .001 of a second but any raises or dips in the road will effect the timing, they retail for $395 but I got mine on ebay for $120, they are on there all the time. I will let you know how I go comparing it on the drag strip next wednesday. Dazza. <{POST_SNAPBACK}> Who can install these G-tech thingys? And how and where do they plug in? Can you put them in any cars? Jon

Looks great to me mate!