MYXR6T

like the guys said could be a loose pipe/clamp or as I experiened in th rex I had it was caused by damaged fins on the turbo compressor with causes it to go out of balance and sound super dooper but not good for the turbo Alex.

you rekon ? ahh well wasted $390 then, but looks fully sik shiny but

I know it's a cheapo, but the Monza type coolers fit to factory plumbing and seems to do the job quite good, for their price at least. Alex.

I have run a dual 2 1/2 inch exhaust, not too expensive off the shelf, high flow 3.5" cat, standard dump and made an easy 314 atw's in 12psi. Dany exhuasts did mine and was very happy, not too loud either Alex.

Hi Guys, thanks for all the replies, wish it did fit !! ahh well, will look into Snort performance and see whats available, I shot them an email see if they have any cheapo log type manifold that they could knock up as I don't really want to spend big bucks on this car, just enuf to wake it up a little hehehe ... Thanks Alex.

Hi all, My daily drive an EB Fairmont on LPG, wanting to get sum boost into it, does the XR6T exhaust manifold bolt up to the 4 litre EB head ? If anyone know's please let me know as may get one cheapishhh Thanks Alex.

Hey San, Yeah it's holding up fine for now, but I'm just waiting for that bang ! Don't know when, but I know it's comin lol ... Alex.

Hi ALF05T, Sure gets up and boogies now ! Power is a little bit different, used to own a Rex with 275kw atw's, was alot more controllable in situations 4wd etc .. but yeah the big Ford needs a lot more common sense as not to get into any sideway's trouble and find a pole at 80+ k's !

yeah 205's would save that tranny for sure, fishtale to work, that would be good hehehe ... I'v put a pretty big trans cooler in there, so I hope that helps for the time being Alex.

Hi San, Yep I forgot to mention the valve springs have been changed, they were the Nizpro ones from the group buy. Yeah once the tranny lets go, I'll be talking to Kewish for an upgrade. Alex.

Thanks for the comments guy's ! Yeah the tranny is on borrowed time, see how it pans out I think 265's will be the way to go, the more rubber on the road the better

Hi guys, Thought wouldn't bump the beast to 300+ but was easier done than first thought. Mods include: K&N filter, home made cold air intake, Bosch green injectors, Flash tuner, Monza cooler, auto tranny oil cooler, Dandy exhaust's custom exhaust with twin 2.5" and catco race CAT. car sounds awesome and breaks traction quite easily. just worried about the stock tranny. The guys at Springy Motors (Daniel) did the tune and firmed up the tranny pressures but we will see how it all goes A big thanks to Daniel at Springy motors, rapt with the results ! Now need some new rear tyre's, do 265x35x18's fit on Ford factory rims ? Alex.

Hey Guy's, Got the car tuned at Springy Motors, Daniel did a great job ! Got 314kw's ATW and has transformed the family hack into a beast !

ok thanks for the reply guys, will have to custom tune then

Hi all, Having bought all bits and pieces to fit up to my XR6T (BA 2003), I need to know if there would be generic tunes available for specific mods eg ... Bosch injectors, Wog cooler, CAI, Metal Cat replacement (High flow Cat), just to get me going for now, then custom tunes will happen once saved up