sam71093

ahhh sweet fortunately I happen to have a second set of calipers from my other falcon from when I switched to brembos ill put them on and see how it is thanks.

Front left caliper is dragging causing brake to get extremely hot could only just turn wheel by hand is this a sign of a faulty brake booster. Pad wear is even, slides on caliper were moving smoothly. any help would be appreciated.

Just installed NPC copper mix single plate in my FG turbo seems great so far

Hi all, I just installed a new clutch kit and a remote bleed line from NPC. The remote bleed line came with a bleed nipple that works like check valve and seals on a taper. As I believe you should just crack it then pump the pedal and it should bleed and not let any air back into the system. My issue is, when I just crack it nothing happens, so I undo it a little more then it fluid bleeds through the treads so I tried thread tape but nothing seems to work. It seems that I may have the wrong one as it only screws in like 3 threads (doesn't even make it to the black thread sealant it has on there as seen in photo) then it seals up on the taper. Any info would be great if all else fails can I just buy a normal bleed nipple and use a vacuum bleeder. Thanks In Advance

Cheers for the info these will defiantly be my next purchase

When you say lower it extra over the weekend it is as easy as just using a C spanner and putting more preload on the spring

Thanks for that ill head over there for a look

Hi All, Been reading up about coilovers seen a few people rating the shockworks ones. I am not after super low I just want car to sit level and a improvement in handling. Any comments/feedback about them would be appreciated to help me make up my mind

I fitted all the parts myself except injectors & Flapper Mod so all up it was around 6K

Thanks yeah boost was 16psi tapering off to 12psi

Picked my car up from Joe@CMS today and made the 300+ club, wow what a great transformation absolutely love the new found power, Joe was really helpful and didn't mind answering any questions I had. I would highly recommend him. - Process West Stepped Intercooler + Piping - Process West Turbo Side Airbox - Plazmaman Battery Relocation - Xforce Turbo Back Exhaust - 12PSI wastegate actuator + Flapper mod - KPM 1000cc Injectors - Earls turbo line filter kit Made 326RWKW so I was more than happy

Yep your right I was just thinking the worst

Hi I had my car up on the hoist today having a bit of an inspection and noticed oil leaking from in-between the block and the head (see attached photo) just wondering should this be a concern as car only has 23,000km and is a 2012 model also would it be warrantable through ford

Thanks for that the reason is the wheels I would like to get only come in 9" with no staggered option

Hi Not sure if this has been covered before I had a quick look couldn't find any relevant info I would like to fit 20X9 wheels to my FG sedan all round is this possible without scrubing on anything if so what sort of offset would I need (lastly is this a good idea or unessasary) Any info would be appreciated thanks

Hi Does any one know where you can get a workshop manual, for a FG MKII XR6T either a hard copy or digital

Cheers for the reply

Hi I am just enquiring if anyone knows where you can buy the chrome strips that are around the windows on G6E Turbos and if so will they fit on a XR6 turbo of the same year

Did my wheels today 4 coats of black 3 coats of gloss

Has any one put philips diamond vision in the fg mkII projector headlights

Forgot to ask 35W or 55W

Thanks for the reply did you buy a brand set or just off ebay also low beam on the mk2 are they h7

Yeah as I have tried hid's in old xr6 and had to take them out they were just all over the place and blinded other drivers

Hi guys I cant seem to find much about this topic, I am just interested how hid's will go through the projector headlights, if anyone has tried what are they like to oncoming drivers.

Thanks