BenDoCo

*wisper* Plenty of time to clean his quarter widow and chuck a sticker on bahahaha

Huuuuuuge lols at Keith not knowing what a vetical garden is. Life makes sense again [emoji23] [emoji23] [emoji23] [emoji23]

So about the same time as hell freezes over then [emoji20] [emoji20] [emoji20] Give me a ring when ya can and I'll fill you in on the purple bagged thing - if ya don't already know

Hey Jet Going down to pt radelaide to pick up the rocker this arvo........ when are we gunna put it on? And we can fit the rocker to my car at the same time

Jet --- do NOT read this It's ok folks...... I got it under control Ya see, when we swap my rocker cover over I'm gunna put my spare one on the Clubby while he's not watching ;)

Don't care how good you are......... that ain't gunna buff out [emoji20] [emoji20] [emoji20]

The first computer I used at school never got a virus, never blue-screened or crashed, I didn't have to keep loading 'updates' for it and it never tried to sell me Viagra for 89cents a tablet................. Oh happy dayz

^^ didn't work on my car though, did it Biz :)

Biz could also put an 'extra' blank line between text and pics. Easy to do, just hit the ↵ (enter or whatever it's called) key twice after text and same after pic That would fix the problem for computer users (Hint Hint)

^^ are you a cop?

you KNOW the friggen rules Hi D

Just saw this Matt 10 NSW RobJETF6 /CMS TH400 F6 Sedan - WSID 10.04 @ 136 https://www.facebook.com/simonjess.roncatoangelevska/videos/1004577679592625/

^^ 9 sec street car with stock rear brakes = love it [emoji106]

Jon's exact words when we were fitting the turbo were "Keep the engine bay totally stock looking" and besides swapping to pw cooler pipes, it is. Still have the unused nipple in the shed

I shattered a cv a few months back and havesince replaced both shafts with Repco ones and neither have let go yet (YET) with 400kw. Larger shaft dia and larger cv's. As I have a mate at repco, for the price I paid for them I could replace them 10 times before they cost as much as the big hp ones. The big hp driveshaft shop jobbies need new hubs and bearings as well (coz 30 spline (I think) hub end instead of 28) so if you're thinki g of them make sure you factor in that extra expense

If you don't want to drill and tap the front cover, grab one of these and fit it to the outlet silicon joiner and get it from http://proflow.com.au/catalog/502163 I bought one to use with my new GTX..76 but decided to drill and tap the cover and use the original nipple instead.

Barra Sunday is going to Melbas choccy factory at Woodside ----- yummmmyyyyyy

What's on this weekend :) ------------ Friday Night Cruise Friday October 2nd - 7:30pm Westfield Marion Open page https://www.facebook.com/events/873331662762773/ ------------ HK-HT-HG October Cruise Sunday October 4th - 9am Cruise starts from Castle Plaza at 9am Show & Shine from 12:30pm at Brighton Rugby Club Open page https://www.facebook.com/events/1572736926315555/ -------------- Palmer Hot Rod Street Party Sunday October 4th - 11am Palmer Main Street Open Page https://www.facebook.com/events/100802953594135/ ---------------

Wasnt meeeeeeee Was John

hehe Someone played - Spotto Biz

Just found this. https://www.facebook.com/e85sa The interesting bit starts with "At this time"

If you have small 'girly' hands, it can be done without removing stuff but if like me and have large hands removing the battery/air filter box makes it easier on the FG The low beam globes are the ones closest to the radiator and are covered by a dust jacket. Remove that and then you will see a spring clip holding the bulb in place. Take note of how it fits so you put it back properly and unclip it. There are 2 lugs on the globe holder. Grab those with your hand and turn anti clockwise to free the holder..... it may be tight so use your muscles. With the globe holder free, remover the old globe and this is important now -- DO NOT touch the glass of the new globe with your fingers as the oil from your fingers will create a 'hot spot' on it and may shorten its life so use a cupla tissues to hold the globe and insert it into to holder. Refit everything in reverse of what you just did and your done Always a good idea to change both low beam globes at the same time.

Fixed That For You

Holly crap he can weld

I'm feeling ya Bomber......a sad day to see it all go but a happy day knowing that the next project can now start