Jump to content

Mcfear

Member
  • Posts

    32
  • Joined

  • Last visited

Reputation

3 Neutral
  1. Hi guys looking at getting 17x9 @ 0 offset. Will this fit on the rear of an fg f6 that doesnt have brembos?
  2. Hi guys, Running 380kw, paid a visit to Heathcote and best I could do was 11.57 @ 125mph with 2.19 60ft. Anything stalled about 2k rpm equals heaps of wheel spin - 265/40/20 Kuhmo KU31. Just feel it could do a bit better and on the market for semis/drag radials etc. My question is do I need to do any supporting mods before running these tyres? I.e. Tailshaft etc.?? Thanks in advance
  3. After many months browsing forums, speaking to forum members and tuners I got the ball rolling! I decided Nizpro was the place for my car. 98 Tune - 339rwkw E85 Tune - 380rwkw Mods I installed: - Process west stepped cooler kit - Plazmaman turbo side intake - Plazmaman battery relocation kit - Venom 5" cat pipe - ID1000 Nizpro provided: - Surge tank & 044pump - Valve springs - Blocked BOV - tune Extremely happy with the results. Completely different car. I know if I had a full exhaust my car wouldn't have to work as hard but the most important thing to me is noise levels as I have a little bubs. Highly recommend Nizpro!
  4. Hi guys just a quick question. When relocating battery and installing turbo side intake do you need to drill holes in engine bay to put in place new battery holder? When doing this how do you connect power cord to reach onto the other side? Any help would be greatly appreciated.
  5. Ah okay. Cheers for the offer. I am in Melbourne.
  6. Panda eyes you running twin 2.5"? I think their is someone on the exhaust workshop forum saying they had massive drone with a twin 2.5" system. Possibly mufflers?
  7. Cheers mate, appreciate the feedback
  8. Thanks for the feedback so far. Tuner won't guarantee me anything about no drone. He did recommend varex muffler but I have a mate who has done damage to his motor by running on in his bf xr6t. Was hoping someone knew about exhaust valves etc. Only running hi flow cat atm. Aiming mid to high 300s.
  9. Hi guys, in the market for an exhaust for my car as my exhaust is now restricting my car of more power as advised by my tuner. Anyone able to share what exhaust they are using and if it drones etc? I am after something with a sensible/legal noise and no drone as I have a young baby. Thanks in advance !
  10. Car is a fg f6 with 5" venom cat pipe and tuned to 302rwkw atm. Looking for mid 300s for now, but maybe a little more down the track, not sure yet. Plazmaman 800hp cooler, Plazmaman 4" turbo side & relocation kit, id1000 injectors bought. Just after exhaust and all in and off to tuner. Trying to make my mind in keeping current cat and purchase dump/catback or go for a full system from xforce/difilipo etc..
  11. Hi Guys, Just a quick question about my exhaust. I currently have a 5" venom cat replacement pipe on my fg falcon. Looking for more power and brings me to my question; - is it worth getting a full exhaust and turf my cat pipe? - can I just buy a dump pipe & cat back exhaust to fit my current cat setup? - does a catback exhaust supplied by xforce etc. a direct bolt on to my cat pipe? Thanks in advance guys, just trying to get my head around what is best as this is my first turbo car.
  12. Hi guys, Apologies in advance if already covered, but I couldn't find. Tossing up between the pw stepped cooler kit and pw stage 2 cooler kit. I know one requires cutting to fit an the other doesn't. Car: fg f6 sedan Firstly can someone tell me; - the differences in size these two coolers are? - what both the stepped cooler and stage 2 a rated at power wise? - which one if not both would suit my aim of 350-400awkw? - anyone know if the cooler pipes on either replace all original piping, including throttle body elbows etc? - any reason I should be going stage 2 kit and cut my car to make it fit, anything stage 2 has that makes it superior to stepped/stage 1? Thanks!
  13. Anyone else have this kind of setup or able to confirm?
  14. Yeah I do want more noise. Decision is made on the stage 2 ProcessWest cooler bit can anyone confirm the Plazmaman turbo side cai will fit or will I have to go the process west cai?
  15. Hi guys, Currently in the process of looking at my options and budgeting on first round mods for my fg turbo. Looking at getting a Process West Stage 2 Intercooler kit and was wandering if a Plazmaman turbo side 4" intake + Plazmaman battery reloc. will fit with this cooler? I know that most guys that go process west gear stick with all their gear and vice versa with Plazmaman. But prices vary quite a bit and will affect me as I am on a budget. Any help will be greatly appreciated. Thanks in advance, Mcfear
×
  • Create New...
'