BAturb

I'm in Seaton

If you want them for $350 come and get them, I need them gone

Still got my slicks for sale, grab a bargain before you go away, make me an offer

heres some pics of the wheels

Hey peeps, got a pair of mickey Thompson et street radials, 275/40/17 on alloy 18" lookalike 17" rims, plenty of tread left, good on my car for a 1.6sec 60', $650 for em, get em just in time for the next street drags

I have had the throttle jam flat out on a BA as well, was lucky I turned the car off straight away and rolled to a stop, once stopped I then heard a pop, the pedal just poped back up off the floor, I searched for the cause but never found a problem, and I have never been able to make it stick down again (while the engine not running of coarse), only incident after owning 2 BA turbos over 8 years, just a freak thing to happen I guess, and it can happen, in a panic and if it happens again to anyone here try to keep your wits and switch off the car and roll to a stop on the brakes

Just have to find the time to get to Bruce's, when he saw my run at the drags he said bring it down for an e85 tune and run 6sec 1/8th mile, might try to get down soon the take it back to the track and fingers crossed for a 10sec 1/4 mile lol

So are there any mods required to fuel lines (change rubber lies etc) or is it just a matter of filling up with e85 and getting a tune? Mods on my car is every thing bar rods, also walbro in tank pump and surge tank with Bosch 044, so assuming everything I have read I just need to take a Jerry of e85 then fill up and get a tune, is this right? Fixed.

the only prob with the drags now is the price, he is pricing it out of some peoples reach

hey Wayne, was the surge tank his design or did you use the drawing I sent to you? either way looks good and good price to, I got my pump and fittings from outlaw in the city

when and where is the RCK dyno day going to happen?

thanks Jet, my car launches hard, just need a bit more up top to push it that bit further

see theres a vid on the tube with the black holden (old one, sorry dont know old Expensive Daewoo models, and dont care) the one I ran one time, he done the big burnout cross the start line and got booted off, typical Expensive Daewoo driver

yeh, the hose was bloody dear, and your right it was a hell of a job getting the hose over the fittings, I remember thinking I hope its right coz this hose isnt coming off, and the tank and fittings were pressure tested to 110psi for 5mins in a bucket of water, no bubbles no pressure drop

hey Jet, you upload the vid of my run? got a link?