Shepp0

Hey guys, I picked up this 5 speed manual BA XR6T a couple of weeks ago.. It's got XForce front mount and full exhaust system.. I've picked up a 6speed conversion, upgraded turbo, cwest plenum, surge and fuel pump, 60lb injectors and I just ordered some Atomic valve springs.. I intend on installing air assist bags to help with towing my track car, also, possibly upgrade the front brakes.. I've read the turbo territory calipers and discs fit?

I'm guessing the Ute and the Sedan use different tail shafts? if yes, will it have to be a shaft from a 6 speed ute or are there any that will bolt in?

Hi Guys n Gals, This is my First Post, so be Kind! Ive just picked up a BA XR6T (manual) and after reading a fair few topics on here, Ive decided to go T56. It just so happened that there was a T56 conversion on eBay today. It had an upgraded 11" clutch, lightened flywheel, peddle box, tailshaft etc. So I plan to Put the T56 into my ute and try sell the T5 "conversion" to someone to help get some $$$ back in my pocket for Valve springs and Custom Flash tune. So my question is: What parts do I need? Im sure this is covered in other posts, so if someone could link me too it, or breifly tell me what im going to need, that'd be Awesome!