I have an 04 ba xr6t mk 2 auto had 130 000kms on it and here is the list of what needed doing in the period of 3 mnths after I bought it, *new coils and plugs *new discs all round * new upper and lower rear control arms * new control blade bushes * had an aftermarket gasket on the manifold to turbo flange which blew out and caused the studs to rattle loose, check these periodically one of mine actually rattled al the way out! and lost it * vaccuum boost regulator needed servicing just a squirt of wd40 down its guts. * new centre dif cradle bush- alot easier to get a mechanic witha hoist to do this dont be a numpty like me and do it with vehicle stands and a a couple of trolley jacks was an absolute PITA. * and new front wheel bearing and hubs * also I know u were looking at a manual but for anyone who has an auto if some one has serviced your box in the past its all to easy for then to have cracke the arse out of the ally fitting which go into the heat exchanger, I investigated a slight ATF weep on the bottom hose of my heat exchanger didnt notice the crack and did it back up again and busted the arse out of the fitting lucky we have a good wrecker that's open saturdays which had a fresh BA come in, alway something to keep in mind sorry for the lenght of post