Kyleaussie

New plenum fitted ?

Any update??

Dose anyone have pics of the 5in inlet to the 4in process west air box intake setup? I can't seem to find a 5in to 4in silicone reducer so I may have to make a stainless one

Sending the gearbox away to be built and stall so hopefully I can have in up and running by newyears

Just trail fitted my gtx4294 and she fits well. Just need a new dump and intake now

I run around 16psi and leave the water in 4th untill I feel the tyre grabbing then back off

Just wondering if their is many people running low 10s on et streets? I'm running 275 17s but I was thinking I'll need doctors brake swap and go to a 15in rim and full sick?

I'm in Mackay qld but I think I'll be going with monstatorque by the looks of things

Thanks ill keen to hear the response

Just wondering who has beed doing the best zf builds at the moment? I'm wanting it to and handle around 800rwhp and is 3000 still about the max stall size for these boxes?

Has any new info come out about this? Who could I contact to ask?

Alex Davidson was on their from the pervious owner

Not sure on the manifold brand. 700rwhp on e85 is my target

Just need to make up a intake pipe to connect my air box!

I've love to see 522 (700) on e85 but anything over 500 will do for now

Running a t04z now will be aiming for 500+ rwkw

I've just built the engine. Just running it in at the moment :-)

I think the 3rd to 4th shift is suffering already on 18psi :-(

Oww I just want a 10 first!!

So my build on my bf f6 went a bit farther then expected and now will be lookin at around 500rwkw. It's running a zf box with an edit and run a best of 11.2@128 with the stock engine/turbo combo. My question is.. I don't really have the money to spend 5g on a build box and 3G stall at the moment so I'm thinking of just doing the tail shaft, cooler and flush with new oil.. I just want crack a 10 for now and save for the built box! Does anyone have ideas on what should be done to strengthen my driveline on a budget until I have the money to blow on cvs and a built box?

Thanks Henz. Ill try Order a set in the next week or so and upload a pic if all gos well

Thanks mate.

Has anyone tried a 275 nt05 and 19in dark argents? I have 245s and the tyre is almost skinner then the rim!

im just about to order a set of these wheels http://www.ebay.com.au/itm/19-INOX-VOYAGE-DISH-WHEELS-CLEAR-FPV-HSV-BREMBO-BRAKE-FIT-AUDI-BENZ-BMW-/280948392348?pt=AU_Car_Parts_Accessories&hash=item4169d4419c I was going to go 19x8.5 32offset and 19x9.5 38offset. theirs a few threads on these but im running ultra low springs and a want to be able to run a 275 rear tyre?

after rebuilding my engine I start the engine, everything sound good no strange noise or oils leaks. I shut the engine off and the turbo it still spinning the a good 30seconds and making a loud bearing noise??? I cracked the oil feed line and there is oil their and the engine has good oil pressure! any ideas??