Jump to content

ian69

Bronze Donating Members
  • Posts

    31
  • Joined

  • Last visited

Everything posted by ian69

  1. mine would not start warm or cold just turn over I had to turn the key on&off to prime the pump
  2. no worries have fun
  3. here you go mate it just under the starter motor I think they got the vavle from pirtek
  4. mate I will have a look tommoro its in the fuel line ill see if I can get a pic 4 you
  5. no worries thanks
  6. so I need to face the out let;s down facing the intercooler that right. it wont fit with the outlets facing the head light if that makes sence
  7. v+it wont fit beteen the cooler and the condenser it will be on a angle and I was going to get some tags welded on top of the inter cooler to hold the bottom and make a bracket four the top
  8. I was told $880 four the injecter's and fitting so that's what I payed I am more then happy with the car and the service now I need to do the axle&diff bearings .
  9. I was worried were I am they don't like you taking your car back with a problem .that's why I took it to rocky and like I said the boys come out and fixed it right away no charge and rang me on wednesday to make shore it was ok. now that's service
  10. donating done hope it helps
  11. no worries will have a look at that
  12. I just got my xr6 bumper painted it was $160 cash I just took the bumper in and fit it my self .
  13. yep I agree there is alot off helpful people and info on this site .befour I got it tuned I took it in four fault check it come up with 8 faults and they could not tell how to fix them or what they were just numbers would not rev over 3000 come home read some posts went out look around and found the knock senser wires were burnt. fixed that 6 faults gone .hate to think what that would off cost if I took to a shop here .
  14. alrite I rang today they said to bring it back they took the ute out the back and fix it straight away put a new check vavle in come and asked me if there was any think else so I asked all the question;s that I got off you blokes and all was good .so could;t complain about that .and thanks to all you blokes as I new what to ask
  15. and I not trying to bag there work just wanted see what people think .
  16. I am taking it back and I just thought they would put 60lb in .saying that I would be happy with 350hp. I just need to chill
  17. $709.00 four the injectors $90.00 to fit them I just thought they would put 60lb in I mean I read a lot off post in here and everyone runs 60lb .now im going to have to find some one to check the tune again .
  18. no central qld im not sure what to think but im pissed it wont start like it did im going to ring him tommoro and take it back to get the fuel pump fixed .im also thimking about taking it to mackay an talk to cpv tuning and just check it all out .
  19. it idle's fine when started an I would hope they put the real injecters in cost me $880.00 and I dont no why they put 42lb in an not 60lb .they could not give me a print out off the hp because the printer was'nt working I was told .also it does not say what fuel pump they put in on my invoice just got high volume fuel pump .I did ask what pump they put in and they said a walbro I asked what hp it made an they said 380 no print out .I also read that the 42lb injecters are only good four 350 .
  20. not to sure what hose they used
  21. it was hard to start when I picked it up I got them to drop it off cause I got there late .could it be a faulty pump .
  22. picked up my ba ute after tune yesterday and went to start it today and just keep winding over turned it on an off 2 times and it fired its got a new fuel pump .I was told it was walbro .also got new 42lb bosch injectors .any idea's
  23. well got it done still need some hose clamps not real neat but better then what it was . still need a elbow to come off eng breather
  24. thanks fellers will do. I was so pissed when I put new springs an disc an pads droped it on the ground an vribation in the streeing .
  25. so I will have to bleed it then
×
  • Create New...
'