atomicyellowute

If I have injector, valve springs and exhaust done with a 12 pound tune could I go and put e85 in the car?

ok, so my BA motor has cooked its sh**T so im in the process of building my motor with all forged internals, I intend to buy Plazmaman 1000hp cooler Plazmaman Plenum Plazmaman Turbo Side Intake I already have surge tank and pump my aim is for about the 450Rwk mark so what I was wondering for one is the stock turbo going to be able to produce these results? if not ive heard the comment "GTX turbo" a fair bit and was reading in a magazine about these new turbos that are making full boost at like 2000rpm... im a complete novice when it comes to turbo's I can get my head around everything else but im buggered for what one to look at buying (if I need to) pretty much in a nut shell my question is what turbo do I buy in order to produce 450rwk? opinons.. thanks in advance

Hey mate I'd be interested in those pistons and rods ill give you a pm tonight

Is there any difference between the ba block and bf? Apart from skinnier rods of coarse

What kind of power do you think that motor will handle? Don't have 7500 for spool :|

So I'm planning on building my BA motor over the next 6 months Could people give me some ideas on what to buy ie pistons, conrods, etc etc Limited wage so this build sure will take me a while!

I watched my mechanic do it, took him a full day, it's advanced work!

So today my mechanic was fitting Plazmaman valve springs to my BA motor.. I hoped to push 350 out of it whilst he was pressurizing number 3 cylender my mechanic noticed a whole heap of air escaping, we got the cameras out and dived into the cylender head to find a scortched bore. and it was even worse on number 6. just goes to show the luck of the draw, this motor had just hit 100ks with the previous owner not giving it a hard time at all. it had only been running about 8psi on 42lb iinjectors for a couple of years. its sad because it pulls me away from the xr6 turbo motor a little. I dont have the money for a rebuild at the moment nor a new motor, so im stuck for ideas. so this is my situation a very neat xr6 turbo ute, with lights mods and lowish ks, I want 350rwk that's my project and my plan, opinions as to cheapest/best way to do this?

You are a lifesaver!

But you wouldn't be Able to skip songs?

Just wondering if anyone has had any experience in get wheels re chromed, I have two rims that are gutter rashed

Hey guys just wondering, if I was to install an aftermarket CD player in the tissue box is there anyway I could retain the use of my steering wheel controls?

Exhaust is a full 3.5 inch system, with 12psi actuator already installed I'd love a full atomic one day when $$ allow I read somewhere that it was the color name for my car? Could be wrong though.. Might have to give this boost a try then

Hey guys on Monday my ute goes into have fitted: Valve springs, surge tank and 044 pump It already has: 42lb injectors, heavy duty clutch My mechanic is going to tune it and push 15-16psi into it, my question is will the stock bolt ons (cooler, plenum, air intake) handle that sort of boost? And I plan to buy all the bolt ons, I'm saving at the moment. Will the motor run this sort of boost, complete stocko?

I'm that jealous of this ride! I'm in the process of building a ba motor at the moment, hopefully going to get to 350 then I'll get onto the internals, no screamer before 16psi? Glad I read that..

Also boost cut

hey guys just joing up! I have a ba xr6t Daniel