joncitizen

O-ring on the back of the waterpump, if it's on the DHS.

That just looks like a regular drop in tank, not their heavy duty one. I think there is only one AIO solution which is the aftermarket industries one but only suits late BF2 tanks (post Sept 07 tanks), but seems big $$ in comparison, but so does a surge tank once you factor wiring, pump, fitting kit.

Just remember no LSD in a G6E Turbo, so you'll probably be doing one of those in the future with your diff bushes.

Check the intermediate shaft on the firewall to rack and the bolt holding at the bottom of the steering column, this is what was the cause in my BF Falcon... so could be something to consider.

I have a genuine set here in Greater West Sydney 5 minutes from the drags if you still need some. Also have the o ring for oil pickup and other bits and pieces like front crank and rear main seal, all genuine.

Hey man, is this what you are after: https://www.ebay.com.au/itm/152890612312 ?

Hey if you haven't got the balancer tool already or opened it, just get crafty like Benny and put the money else where. Check if the sump has a gasket, because later on they became a silastic special just like the timing cover w/ 2 half moons.

How'd they compare to PR - Riverstone?

Why'd you remove the Nizpro cooler in the first place?

For reference, I've made just shy of 400rwkw on e85 with a GTX3576 (5862) copy with a 1.06 rear housing and 0.6 comp cover (4" inlet) with wheel spin on a roller dyno Sounds like a VL though...

Any updates?

Don't think this is the case with FG arms, need a whole replacement.

FYI that green bit is factory. Put it in a vice with rags and undo it. Be prepared for it to get damaged. You could also try with a oil filter strap tool, but I had no luck with it.

yum

Yes, it uses the same wedge mount. 3 wires - ignition, ground and reverse trigger (if you want it to cut out while reversing)

You need to change alot on the front to go to a BF2/BF3 Front End: Headlights Egg Crates Bonnet Grille Radiator Shroud Fog Lights Fog Light Surround/Blanks Fog Light Connectors Bumper Cover

If it's BA/BA2 XR or BF/BF2 XR yes all the same, but BF2/BF3 non XR is not the same as BA/BA2/BF1.

Where abouts are you?

Coz it's 20% off today...

Maybe see what PAC Performance, MTQ or GCG can do for you for the core, they are all official distributers of Garrett. Yet they seem to put every part of Atomics catalogue in a Xerox overnight... 🙃

Go on then bloke, tell us the good news. We've already heard the bad.😆😆😆😆

Wow, alot going on... All the braid on the passenger side firewall looks like spaghetti... lol, More $$ in fittings and hoses then entire builds Love the wrecker tag on the FG rocker cover for extra street cred. Have you considered the billet MFP radiator mounts and a oil feed like bracket

Before it goes on the dyno perhaps get a boost leak test done for $50 at AMC Performance on Jedda Rd, just up from CMS, see if there any other leaks. Those rubber couplers are the same ones used on the comp cover as well, might be split as well. Also consider a cold side piping upgrade and some Murray Constant Tension Hose Clamps (Hot side Pictured - but you get the idea) Did you manage to sort out the wastegate? This may of interest: https://www.gumtree.com.au/s-ad/bundaberg-east/engine-engine-parts-transmission/process-west-ford-ba-bf-xr6-turbo-intercooler-piping/1253914371 Hot side is $350 alone....

You could put an adjustable pedal box in - assuming auto... Your steering column already has the wiring, the switch goes into the recess/blank out below the barrel... Now I have seen some that just bring the brake pedal up/down and some that bring both up and down together... Might be worth looking into...

I think it's a FAULT, you can only have Traction Control or DSC not both. DSC is Traction Control with a bosch steering wheel angle sensor on the bottom of the steering column with a purple plug and probably some revisions of the ABS modules... Look at the button where the fog lights are, it's a car going sideways not a wheel spinning, should correspond to that button. I have had 2 BF2s (DSC) and 1 BF (BF) and both BF2s will only light up the top left button when pressed. Bottom right on the TC car. Get it checked out...