Jump to content

MCWILLY

Member
  • Posts

    190
  • Joined

  • Last visited

Reputation

1 Neutral
  1. Will a bf f6 actuator work in a xr6t without a tune?
  2. Obd bluetooth scanner with torque app on my phone
  3. Cleaned the sensor all lines seemed fine. Still has the issue. Noticed it is hitting around 11psi
  4. Hi, I have a standard bf xr6t and just recently the car has the check engine light come on when driving it hard. it gets to 3rd gear coughs and splutters and then engine check light comes on. I have a OBD2 bluetooth scan tool that I used to check the codes and it appeared with the P1227 which appears to be wastegate overboost. Any ideas what would be causing this? I have done some searching and most people that have this error have it when they get a tune which isnt applicable to my case. I will be checking the wastegate solinoid and hoses this afternoon. is there anything else to check? Thank you chris
  5. would this cause a P1227 error code (wastegate overboost) I plan on cleanng this today or buying a new one.
  6. I have sl front and ssl rears but the rear doesnt look much lower then standard and the front seems slammed. Has anyone run sl fronts and sssl rears in a bf mk1 sedan. Does it sit more level?
  7. Anyone that has replaced there standard bf typhoon cooler with a larger one that happens to have the standard brackets they would sell I urgently need these?. I have posted in the wanted section but need these asap. Thanks
  8. Backed it up with a 13.4 @109mph 2.1 60ft best 60ft was a 2.0 but stuffed up further down the track
  9. 13.37@108mph 215kw atw fully standard bf mk1 sedan Maxxis tyres on wear indicators
  10. Springs are brand new went in the other week measured it the day I put them In. I will get pics. If my exhaust Is stuffed you can tell me because hopefully it will stope hitting everything then. It's the cat on mine that is lowest point
  11. Are you running the same as me tresurehunt?
  12. That's sl front ssl rear with 20x8 +36 What's your setup tresurehunt? Anymore then sl and ssl is illegal. My sl and ssl is only 90mm lowest point on 17s
×
  • Create New...
'