NRGIZE

sure is man last sat night got a few pic's and yes 1 does the ute on the left and the other is a mate from newcastle which he comes here alot

first time out and will be going back 11.544 was my best. ended up having a problem with the rear end upper and lower pivits where broken!

would be great to get that time! yea webber is the man always chat to him hope he comes the night I'm there give me some pointers lol will post up once we all work out a date pending weather etc

when the nights cool down I'll be heading out with the cms boys and the pbf crew for sure! will also be running semi slicks yea next year I may get the gtx turbo and a new fuel rail

yea mate still the stock turbo just with these mods done to it. exhaust house mod done with ported waste gate and 32mm flap new .7 comp housing and 66mm wheel very happy with it. now just gotta wait for a cooler night and hit up WSID with some slicks

thanks man the 98 tune is only 90% complete as joe ran out of time but will be going back soon to complete it. my guess is around 370/380kws

will get some up next weekend mate as the new cooler will be installed etc

thanks guys! I'm from penrith my old car was a dash green xr6t which is around penrith also plates are HO74RD, thought I better do the right thing and go FPV this time and will never look back! yes a few things going on next month & CV are the last guys to tune it which made 300kws for a safe run in tune. will be going to CMS with the following upgrades next month... Stage 3 intercooler kit with cast throttle elbow, process west in tank surge tank, 1000cc injectors, process west fuel rail, turbosmart bov. with a tune joe said with this turbo should be over 400kws whats done to the car so far... Stock F6 injectors •Engine block chemically cleaned •Block decked and line honed •Aries forged pistons •Atomic steal rods •Crank micro polished •Atomic race harmonic balance •Atomic head and main studs •Atomic oil pump gears •Atomic heavy duty timing chain and new guides •Cylinder head serviced with new crow valve springs •Turbo rebuilt new bearing pack Exhaust house mod done with ported waste gate and 32mm flap new .7 comp housing and 66mm wheel •battery relocation kit •4 inch ceramic coated dump 4 inch cat into 3.5 inch single exhaust •Transmission rebuilt while engine out all solenoids replace new bands and extra clutch for top gear converter split and checked new external trans cooler with braided lines. by the way the box shafts are still stock which was going to do when box was apart but didn't end up doing it •Rear suspension cradled dropped all bushes. Replaced with supa pro nolathane bushes, bilstien shocks and pedders lowered springs •Front radius rod bushes changed to nolathane with more caster Nolathane Sway bar bushes

more pic's to come in the coming weeks

yea for sure F6 this time

hahahaha it's sad but nothing I can do family first!!!

that's what I'm thinking but I roof over our heads is more important then a car :( so buying a house is my only option!!!

car is now for sale :( http://www.carsales.com.au/private/details/ford-falcon-2009-12578504?base=1216&vertical=Car&Range=Price%3AMin%2CMax~1&eapi=2&sort=default&cr=0&__N=1246+1247+1252+1282+1216&silo=Stock&find=HO74RD

Hey guys looking at getting a new clutch. was wondering what you guys reckon I should run? lets say mal wood 3+ and its organic? if so how much $$$ and where from in sydney? don't wanna be breaking sh*t if it's to much pressure for the box etc cheers guys

v2 kit process west

just in case I have another FG lmao

anyone know where to buy aftermarket rocket cover garnishes for FG XR6T? cheers

got 2 new ones today $30 from ford thanks for the info guys!

thanks guys so they are common to sh*t them self's after only a few years?

I'm from penrith also

the car is only 3 year old wtf? factory fault maybe? it's like a little river going past the coils on the other side :( 1 question I have is that last time we tried to take off the rocket cover we couldn't get the bloody thing off as the cam sensors would not come out? is there a special way of pulling them out? I thought they would just pull out but that was not the case? ok ford sent out the wrong parts & also there is nothing listed for the part wtf? is it an O ring that needs replacing? how can ford not know what I'm talking about lol does anyone know a part number or any more info I can give these clowns?

hi guys both my cam sensors are leaking oil & just wanted to know where to buy them cheaper then ford? I'm sure you all know which part I'm talking about (at the front of the rocker cover) cheers