evo
-
Posts
33 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Store
Articles
Media Demo
Everything posted by evo
-
I just put my F6 up for sale if you are keen http://www.carsales.com.au/private/details/Ford-Performance-Vehicles-F6-2008/SSE-AD-3027571/?Cr=1&sdmvc=1
-
My drivers side guard scrubs more than the passenger side. Its strange but the wheel sticks out a little more on one side, you'll find the rear is the same. A lot of cars are like this.
-
I have 20x9" +18 on front, just scrubs with 245/35/20 tyres - its very low at the front. 20x10" +18 rear, 275/35/20 tyres, heaps of room, probably another 10mm with lowered leaf springs and 1" block. You wont need to roll bjwortley
-
It will but depends how low the front is, if its low it will probably rub the guard on every bump
-
That's correct mate, got plenty of clearance with no spacers and guard pump. The fronts scrub on bumps though, may need skinner front tyres, currently have 245/35/20 on front.
-
20x9+18 - king spring front springs ssl 20x10 +18 - king spring ssl leafs and 1" block in rear (rear guards been pumped slightly so could fit 15mm spacers)
-
Yeah that's it mate, I think they suit quite well. the chrome ones would look crap on it though. Also probably suits a darker colour paint with the black insides. Yeah the 20's a perfect except the tyres are scrubbing on big bumps badly, even with the front guards rolled. I might throw on some 20mm bolt on spacers on the rear, the 10" +18 offset still sits in to far for me lol
-
Yeah I went the DRL headlights, while I was down at mars performance picking them up they asked If they could take pictures of the tail lights for autocad drafting. They are going to make LED tail lights for the FG ute (about time someone did). I will have first set, apparently they are going to make 3 different versions. Also went to HWY meet in Ringwood the other night, left pretty early when the police started blocking off entrances.
-
Cheers guys, yeah the tyres need some gloss tyre shine to make it look perfect. I've thought about 1" lowering block, I used them on a hilux before but with this amount of power etc im not 100% sure on them, have you used them on yours before? The wheels are actually a copy of a dodge viper wheel from the USA, there's no manufacture as its just a replica wheel. by the way, I have more grip now with the 275's on the rear, now I can keep traction in 4th lol
-
as requested mate although I need to lower it in the rear more. I have kingspring FOR-303SL in them, should I reset the standard leaf springs? I have them in the shed still.. I think it has Ultra Lows (aka SSL) in the front. removed mud flaps while the wheels were off. wheels specs below... 20x9 +18 front with 245/35/20 20x10 + 18 rear with 275/30/20
-
just bought some wheels from USA, fedex over in 4 days, sh*ts over auspost lol pics to come soon when this rain pisses off, specs are: 20x9 +18 front - test fitted, lil bit of poke but no tyres fitted yet so wasn't a true measure. 20x10 +18 rear - sits in around 15mm or so, no tyres either so wasn't a true measure (might use bolt on spacers if needed) Going on fpv f6 fg ute sneak peak picture attached...black gloss, multi spoke concave, 20"x10"+18 wheel
-
Yeah shes a real nice ute mate, love it. more mods to come. it just has the basics mate. cooler & piping kit, cat, intake kit, flash tune. I've just installed an amp+sub, HID lights, 20" wheels from USA (photos soon to come), custom exhaust...I had a bloke put together dual 3" flute tips, the rest will be welded together soon
-
yeah not going ahead with the S2 lights, not worth the effort as mentioned. Also the DRL lights for FPV F6 (same as XT) look alright in black...I am considering them now. I have HID's in the standard headlights and the light is scattered a tad, I see some people flicking down their rear view mirror lol.
-
Thanks for the info mate
-
Yeah I've seen them mate but not a big fan of the Audi LED look. I would rather buy the FG series 2 headlights.
-
Just wondering if anyone has tried the FG s1 to s2 headlight conversion? I believe the normal beam and high beam have swapped sides. I'm keen to try but waiting for some aftermarket headlights to come out for the FPV.
-
Yeah I'm sending them back up to Jase once I have the VIC plates so they are for sale. Plates have been protected by the cover too, so they are A1 condition
-
Probably saw me driving on the way to Melbourne mate, I just got roadworthy, only needed new tyres on the front for a pass Such a clean ute for 2008 model, only 27,000km on it.
-
Gday guys, Just bought a FPV F6 Ute (FG) I want to fit 20"x10" on the front and 20"x10.5" on rear. Just wondering if +20 for front and +15 rear offset be the best flush fitment on the ute? or could I push a lower offset on the rear? Cheers, Michael
-
cheers mate, verrry keen for the drive! at least the first 30mins anyway haha
-
haha nah mate, its my nickname actually, my surname is evans so they call me evo I've had a couple of 180sx's, r32, s14 and a stagea, time for some aussie turbo!
-
Gday fellas, Just purchased a 09 FG F6 Ute with 25,000kms on it. Driving it back down from QLD this weekend and she has a nice 350rwkw on it picture of it in the left, QLD plates were 31OFG - obviously cant have them in VIC though. Cheers, Michael
-
25 with 2009 FG FPV F6 Ute - 350rwkw
-
Most of the guys on 10"+ rears are Utes mate, looks like you have a sedan going by your picture?
-
Thanks for the info mate, I would of thought you'd need a higher offset of around +35 so it wouldn't poke to much? you got any pics of one fitted? Depends if you got coilovers on front too so you can get some negative camber happening?
