Jump to content

Kosij

Donating Members
  • Posts

    2,045
  • Joined

  • Last visited

Everything posted by Kosij

  1. Hey guys, I have been told that my rear rose joint bushes are worn and need replacing. Now I'm wondering if anybody could show me what they are? And are they easy to replace or do they need to be pressed in.
  2. What globes do I buy for a ba! Do I get hi and low separate or can I get them both in one and if so what wiring adjustment is needed! I
  3. My xr6T is registered in my partners name and she only heads a p2 restricted license! So the short answer is yes you can!
  4. No harm if your willing to post pics & detailed instructions! May change my mind and I might tackle it my self
  5. and once set clicking on the circle or star it takes you straight to the updated page/post! Saves you going page by page.
  6. Continuing from my previous comments the supplier has sent me a new bonnet and I can keep my old faulty one! Can't wait to put the new one on and paint
  7. Does anybody else have problems with the mobile version! Sense the new advertising banner is up the top it has made the page very very wide and hard to navigate! Is it just me or are others having this problem as well?
  8. Has anybody got one of those Intercepter gauges on a ba falcon? If so do they read all pids???
  9. Bloody autocorrect!!!! Ok I will get original logs from sprio & get logs from this check up and see! Cheers
  10. Yecoal might ask the guy who dynoed my car this time? What would I ask? Is timing by degrees or???
  11. My check up dyno said boost was 15psi timing low and afrs okay! Just going to replace hot side piping & leave it as is!
  12. Spoke to sprio! All good as he said "has the car changed or lost power after the tune" NO so he said don't worry synod are fukd for numbers and only good for tuning! But he did say send the xcal to him and he will adjust the fan settings Also he said I won't require a retune once I replace the hot side piping!!!! Might just get another check up once replaced
  13. Still on the first tune...... Only had a dyno run to see afrs & power! I have emailed the tuner who done it and I'm awaiting he's reply. Hopefully if he respects he's work he will resolve my claims & put my mind at ease. I would go to a new tuner but another $800 is a lot of money to write over the tunes I have!
  14. Just done some data logging! Under full boost at 5185rpm intake temp was 54.3c coolant temp was 96.6c even with my high flow thermo stat. Engine oil was 83.8c It was 30c outside!
  15. Cheers guys, No rear muffler! And standard hot side to the cooler yes! My tuner is 6hours away might organize a trip go see him and double check everyrthing.
  16. I understand but when you pay top dollar for a service I expect that service to be carried out! I understand all dynos differ but I posted the question because that much of a variance I wanted to hear thoughts on. I am happy but if 259rwkw and 15psi is correct then NO I'm not happy! Would you be considering all the mods that have been completed.
  17. Yeap tuned by sprio, pulled 306rwkw with 15psi! Took it to another dyno 2 months later for a checkup and pulled 259rwkw second shop said timing was low and afrs were alright, It's a shame I'm hours away from a Strip!
  18. For my mods and 15psi what power would you expect?
  19. Looks like I will have to wait and see quarter mile
  20. Hahahaha nah nsw, might just have to wait till I quarter mile it! I get 0-100 in 5.3sec and hit roughly 175klm in 400m!
  21. Only problem is that I'm 6 hours away!
×
  • Create New...
'