Kosij
-
Posts
2,045 -
Joined
-
Last visited
Everything posted by Kosij
-
Just wondering can a switch be ran so I could switch on my thermo fans when ever I needed to? Or will doing anything like this affect the computer?
-
+1 for atomic great service great price delivered next day! Atleast you no when they will come!
-
Yeap track will show you! It solved my thread issues I was complaining of the different dyno numbers only to run a 12.8 at 115mph so forget the dyno figure and worry about 1/4 mile time
-
Yeah real bad! Not! Nice to jack threads! As said before the throttle body was returned with a refund to cover your postage!
-
Rswepn! I sent the throttle body back a fair while ago! Yes I still run VCR, I notice if I accelerate before putting it in drive it doesn't do it as often.
-
Cheers thanks heaps,
-
So I can just unplug unbolt remove and reinstall with a new seal?
-
Do you have a part no.?
-
Same here :( can you just un do the bolts pull them out replace gasket and reinstall? Or is there anything special that needs to be done?
-
Wtf! $600 to change a gasket! I would go back and shred him another ass hole!
-
Nope 4spd That's why I took it to the track to see! Time suggest more like 260-270rwkw :(
-
^^ he forgot to turn tc off
-
Ran last night 306rwkw Best of 12.8 60" 2.0 Mph 115
-
Yeap I waited 10 mins car ran hot & sh*t!
-
120mph he didn't say that he had an andra license but he must have something as they let he go run after run!
-
Nope! He said he's done about 30 10 second passes no cage and still going back a Expensive Daewoo before him pulled a 10.9 and got booted
-
Ok guys an update. I ran at wsid last night 4 runs managed 13.3 - 60" 2.29 mph 111 13.2 - 60" 2.34 mph 110 12.9 - 60" 2.17 mph 111 12.8 - 60" 2.09 mph 115 So based on them firgures give me advice on what you think
-
Sure was!
-
Pretty good night a few xr6ts there! And one that ran a 10.7 and a 10.6 nice ride
-
Yeah my tps is the old triangle one! Might just source a cheap newish throttle Body to fit
-
Ok cheers any way to tell if it's faulty? Or just replace!
-
Got codes P1270 P2110 Something about rev limit reached & throttle body fully opened!!! Can you explain where the PCM is and what it Looks like?
-
Battery is good but I'm going to replace it! I will plug the xcal in and start it up and see of anything comes up! What I don't understand is if the engine light is coming on why ain't it logging codes? Also what do you mean by possible PCM aswell?
-
^ where's the cam sensor? Yeah seriously lumpy I'm far from my tuner :(
-
Once stated its all fine then when I select a gear then that when the problem emerges! It runs that rough everything shakes and knocks if I accelerate it won't respond! While having the fit if I put it back in neutral or park it doesn't go away it has to be turned off ad back on again.
