Jump to content

234Fpv

Donating Members
  • Posts

    522
  • Joined

  • Last visited

Everything posted by 234Fpv

  1. I had an annoying whistle. Turned out to be a bloody tiny hole in the mirror indicator from a rock
  2. I had Yokohama advan v103's and they were awesome. Expensive though and all four were shagged in less than 10,000kms. I just use falken fk452's now. Not the best but decent traction and decent tread wear. As previously said though a lot comes down to the tune
  3. Happy Birthday 234Fpv!

  4. Looks good mate. What cups/pods are they?
  5. Super pro bushes mate
  6. The piping is process west. I plan on doing the suspension in the next few months. I was going to do sway bars and lower it but was told the sway bars don't need to be done, just put in poly d bushes. Not sure if I'll go with coilovers or just lowered springs and short shocks.
  7. Nice work. A bloke I know has a vcm set up in his supercharged maloo and it works well.
  8. Threads like this make me glad I got a manual. I was considering putting a built c4 in mine but was talked out of it. No reason was really given other than it ruins the nice new car with an old style box.
  9. I have the x-force 4" and like the sound but I'm thinking of going atomic stage 4 cams. They sound tough.
  10. I finally took it for a run down at benaraby. I had a ball but the stock clutch didn't like it at all and was slipping/smoking pretty bad. This was my quickest time but lowest mph. All other runs were 120mph. Tyres were falken 452's @ 25psi.
  11. If you want to get it done in brissy I'd wait until you got there before fitting them. Easy job that takes about an hour and always better to be safe than sorry.
  12. What is the mod people are doing to their stock fg f6 turbos changing the front housing and wheel? Aren't they getting up around 450rwkw?
  13. I'd do the turbo mod if you are going to up the boost. Especially if you are already pulling the turbo off.
  14. Nice work mate
  15. I removed my fuse box and wired it in below the relay as the instructions say to do. I wonder why they don't just say to splice into the big pink wire in the harness coming out of the fuse box. I would've done it that way but had no confirmation that that was the right wire so pulled the fuse panel out anyway
  16. I've heard the option 5 is "clunky"? I'm starting to look at my options.
  17. I'm down in brisvegas for the weekend and limited myself to a dozen jacks so I could come tomorrow but may have gone over by one or ten. Hopefully I'll be all good in the morning and get to meet a few of you guys out there.
  18. Haha yeah I'll see if I can change it to "almost finished"
  19. I finally got a chance to start the glorious job of doing the valve springs this afternoon. Will have to wait until tomorrow to finish it now though as I don't think the neighbors would like the compressor going half the night. I was very please with the pw surge tank and pump set up. Easy fit and nowhere near as loud as I thought it'd be.
  20. Android has torque, better than rev. Not sure about on a blackberry though
  21. I think you can get some chargers that are safe can't you? I'd never use a normal charger and do it but I had a trickle charger for my bike and it was designed to be wired up to the battery with a plug where you plug the charger in so all you do is plug the charger into the plug on the bike.
  22. 234Fpv

    Best Power

    Depending on the tune you can have 400rwkw and still not smoke the tyres in third. Tell the tuner exactly what you want and they should be able to give it to you.
  23. What is it like there for spectators? Shade etc. I'm down there that weekend for a mates 30th but will have my wife and kids so might just come for a look.
×
  • Create New...
'