Jump to content

FG_G6E

Member
 View Profile  See their activity

  • Posts

    35

  • Joined

  • Last visited

 Content Type 

Everything posted by FG_G6E

  1. FG_G6E
  2. FG_G6E
  3. FG_G6E
    No worries mate glad I could help
  4. FG_G6E
    According to microcat 01/06/2006 BF Turbos sedans have now superseded to a FG tailshaft Part number BG 4K145K and list a centre bearing separate Part number BAF 4800 A list price $234.19 + GST. Looking at the ford workshop manual you remove the uni joint and there should be a nut holding the yoke on. Hopefully this helps you
  5. FG_G6E
    What transmission is in it ? According to the BF workshop manual it's pressed on to the tailshaft
  6. FG_G6E
    According to Microcat the FG is a complete tailshaft no components are serviced. But for some reason if you go in to the BA/BF catalog some late BF's use a FG tailshaft which you can buy a centre bearing for. What type of FG do you have I might be able to find a genuine part number for you that might work.
  7. FG_G6E
    You would have to buy a new key if people wanted a flip key setup then train the key to the vehicles BEM module. The part number for the key blank is BGF 22053 A and the remote BG 15K601 A. To replace the key itself I am looking for a part number still. All the key blanks come with the chips inside just need to be programmed to the vehicles BEM to start the car. So if u have 2 keys and the fg key is cut to your car you should be able to train the key your self to your car.
  8. FG_G6E
    If you have 2 keys already you should be able to reprogram the FG key to your car the transponders for all BA,BF,FG Falcons are the same you will just have to get a blank key replacement which I will get a part number for you. If you have 1 key only then it's a job for ford. Hopefully I have this helps you.
  9. FG_G6E
    What type of car is it for BA of BF Falcon ? Where did you buy the key from
  10. FG_G6E
    This is the first time fpv have different diff bushes from non fpv vehicles. According to microcat all fpv from 01/10/2010 have these diff bushes
  11. FG_G6E
    These bushes are not a restricted FPV part so you can get them for a non FPV vehicle. As for NVH I havent noticed any difference yet besides being alot smoother then before. And finally no more clunk in the rear of the car which felt like diff slap.
  12. FG_G6E
    On our parts catalog it's only listing them diff bushes as FPV vehicles only & the same with the ford parts system. So I am afraid you would get them awful diff bushes back in your car until Ford do finally make a supersession on them. The new part number is AR7Z 4B424 AA
  13. FG_G6E
    Ford have finally brought out a new diff bush for the late MK1 and all MK2 FPV Falcons. I had these fitted today to my G6E after having a awful clunk in my rear end with the standard bushes replaced 8 months ago . The problem has finally gone and is a much smoother car to drive. Only issue is cars under warranty cant use these diff bushes. Cost is around $64 + GST
  14. FG_G6E

    Happy Birthday FG_G6E!

  15. FG_G6E
    Yes they do I dont know if that's from HID's or normal from factory I am trying to work around this
  16. FG_G6E
    I now have a set of HID's 6000K in my G6E will take some pictures tomorrow night. A massive difference and from what I can see there isnt much glare from them at all so far no one has flashed me. The headlights are made by Hella for Ford
  17. FG_G6E
    You can buy the clips for the genuine mats there off a LTD but are the same Part Number BL130R00A List price $3.48 + GST
  18. FG_G6E
    The beam is pretty good I can't tell much of a difference between the 2 of them
  19. FG_G6E
    I have only got 1 picture at the moment fitted to my G6E. These are Mk2 G6E which will require drilling for the park light
  20. FG_G6E
    You will tell the difference in a car accident genuine panels might cost alot more but well worth it in the long run. They might look the same but will fail in a car accident
  21. FG_G6E
    That's the reason why I put mk2 headlights in so I could put HIDs in.
  22. FG_G6E
    LOL we are working that one out now. At the moment it's hard to say since there are so many new part numbers on the mk2 but hopefully time will tell
  23. FG_G6E
    There not that bad at night time I can't see much of a difference between them. The highbeam from what I can tell have lost a little distance but not that much.
  24. FG_G6E
    I have access to our ford catalog here are the part numbers and prices for the headlights. These are retail prices less GST XR Mk2 BR2Z 13005 BA (RH) BR2Z 13006 BA (LH) List price $347 + GST Each For All Fg MK1 XT,G6,G6E,G6ET you must use FPV BR2Z 13005 CA (RH) BR2Z 13006 CA (LH) List price $347 + GST Each These Headlights come with a loom attached to them so you can either cut the plug and just use terminals if you wish.
  25. FG_G6E
    I will take some tomorrow after work. I can get retail prices & part numbers tomorrow the last time I looked ford had about 25 headlights left
×
  • Create New...
'