Kroozin

I am running 2 blow off valves the standard one and a kompact knockoff. The only hint of flutter I get is when I first release the throttle after a 17psi hit. Its not what I'd really call flutter though its like half a tu if that even makes sense then the sssshhhhhhh... kinda sounds like a cracking a wip at the moment love it. If I wind the knock off bov closed tight then I get back the tu tu tu.

wish I saw this before I had to get my 60's swapped for redriled factories not so long ago obviously there is nothing wrong with the injectors. Nice wright up Danny thanx for sharing I'll be going back to this when I step up to the 80's.

Hey JET50T yep that was me .. I thought you were a UC until I saw your plates up close. Nice car bud. Was just before 11 on the way to getting my brother.

dude that AVI is f*cked up..haha just kiddin I ended up buying Whiteline front and rear sway bars only I got a 30mm front and 22mm rear. Standard front on my BF MK1 was 25mm front and 19mm back. Makes a huge difference to the cars handling with my otherwise standard suspension for the better.. There is obviously abit of understeer in the front end due to it being a 30mm (I got shonked by some dodgy pr*ck off Ebay) not a 27mm but its so much better to drive and no longer feels like a death trap going thru high speed S bends. Totally recommend getting sway bars especially if your pushing more power than standard.

Nah man he said $1200 brand new "if you can still find them".. maybe its cause there rare now or sumthin. :mail:

The weekends I can do is next wknd, 19-11(clashes with ppl doing the big snowies cruise), 3-12. For those that are keen and just wanna go for a drive, I'll be going next wknd for sure stopping at Kellyville Ridge Maccas on Windsor Rd at 8.30am for some breaky and leaving around 9ish. Again nothing serious at this point in time just abit of fun if ya wanna "tag" along.

Ok had to make some adjustments to the route as I had it down as take the f3 when I ment Pacific Hwy. Also I found Wisemans ferry rd near Peaks Ridge to be a crap rd thst hasnt been looked after.. shame really coz it has some nice bends. Anyways here it is. This Route inc. a ferry still. 1. Leaving from Maccas on the corner of Merriville Rd and Windsor Rd, Kellyville Ridge 2. Turn left onto Windsor Rd towards Windsor 3.3 km 3. Turn right onto Annangrove Rd (signs for Kenthurst) 4.5 km 4. Turn left onto Blue Gum Rd 2.6 km 5. Turn left onto Pitt Town Rd 9.2 km 6. Turn right onto Boundary Rd (BP service Station, snacks & toilet) 1.2 km 7. Turn right onto Cattai Ridge Rd (signs for Glenorie) 2.3 km 8. Turn right to stay on Cattai Ridge Rd 10.2 km 9. Turn right onto Old Northern Rd/Tourist Drive 15 (signs for Castle Hill) 3.1 km 10. Turn left onto Wylds Rd 2.2 km 11. Turn right at the T-interscetion onto Arcadia Rd and follow 1.5 km 12. Turn left on to Galston Rd (signs for Hornsby) 9.1 km 13. Turn left onto Pacific Hwy (BP, SHELL and others) 11.0 km 14. Take the National Highway 1 ramp on the right to Gosford/Newcastle 280 m 15. Keep left at the fork to continue down Pacific Hwy ( Pie in the sky with gr8 pies and shakes) 16. Follow Pacific Hwy to Weird ass intersection and make a Right go 100m then 18. Turn left onto Peats Ridge Rd 13.6 km 19. At the fork turn left down George Downes Drive for 32kms 20. Turn left onto Settlers Rd 4.9 km continue onto Wollombi Rd 21. Turn left to stay on Wollombi Rd 19.9km 22.Turn left to stay on Wollombi Rd 10.5km 23.Turn left onto St Albans Rd 19.8 kms 24. Take the Webbs Creek Ferry destination will be on your right. 25. Head east on Webbs Creek Ferry (take the ferry) 26. Continue Straight onto St Albans Rd 51m 27. Turn right onto Old Northern Rd (If we need to stop we can go left 50m to servo) 10.6 km 28. Turn right onto Wisemans Ferry Rd 18.1 km 29. Turn left onto Millers Rd 1.1km 30. Turn right onto Pebbly Hill Rd 1.6km 31. Continue straight onto Pitt Town Dural Rd 160m 32. Turn Right onto Scheyville Rd 450m 33. Take the 1st left onto Neich Rd 850m 34. Take the 1st right onto Boundary Rd (There is a BP servo/ toilet stop here) 8.0 km 35. Turn left onto Windsor Rd 7.5 km 36. Turn right onto Merrivale Rd (Maccas on RHS at lights) 37. Take the 1st driveway on the left at the The Ettamogah Pub for a hard earned thirst I was planning on doing another dummy run next saturday since a fair amount of it has changed. If anyone wants to tag along feel free to PM me so we can T something up. Wouldnt recommend a big night before hand..lol 3rd of December on a Sat. seems like a good weekend to aim for. Its just over a month away so theres plenty of time to get it organised properly providing ppl are interested. Not inc. stops it would roughly take 3-4hrs. so maybe add another hr or 2 depends on everybody.. The prev. 1 I posted took roughly 3.5hrs taking it easy.

Ill be headed off for a trial run in an hr or so. Let youse know how it goes atleast the weather turned out ok.

http://item.mobileweb.ebay.com.au/viewitem?itemId=260876295290&index=8&nav=SEARCH&nid=17271753666

Thanx JC hopefully its not too bad ill still give it a hit though on sat. to double check the run and stops. I honestly think this will be an awesome cruise given the weather is good should be a good combo

This wknd or next wknd Im not fussed I'm thinking of going for a dummy run this sat though anyway if ppl aren't interested in going so soon

Haha thanx Reg. I was thinking best time would be in the morning start say 8.30ish maybe.. it won't be too hot + better vision for some of the curlies. Its a gr8 drive guys. When I can get to a computer next ill add some servo/food stops.

exhausts are for pussy's

Starting from the Maccas at kellyville ridge and finishing at the Maccas at Mulgrave. Just throwin somethin out there to get the ball rolling.. Its a 201km round trip and could take as long as 4hrs if we really take our time. This route includes a ferry ( 1. Head north-east on Merriville Rd towards Windsor Rd 2. Turn left onto Windsor Rd 3.3 km 3. Turn right onto Annangrove Rd (signs for Kenthurst) 4.5 km 4. Turn left onto Blue Gum Rd 2.6 km 5. Turn left onto Pitt Town Rd 9.2 km 6. Turn right onto Boundary Rd 1.2 km 7. Turn right onto Cattai Ridge Rd (signs for Glenorie) 2.3 km 8. Turn right to stay on Cattai Ridge Rd 10.2 km 9. Turn right onto Old Northern Rd/Tourist Drive 15 (signs for Castle Hill) 3.1 km 10. Turn left onto Mid Dural Rd (signs for Galston/Hornsby) 2.2 km 11. At the roundabout, take the 1st exit onto Galston Rd Go through 1 roundabout 1.5 km 12. Turn right to stay on Galston Rd (signs for Hornsby) 9.1 km 13. Turn left onto Pacific Hwy 11.0 km 14. Take the National Highway 1 ramp on the right to Gosford/Newcastle 280 m 15. Keep right at the fork to continue towards F3 Sydney-Newcastle Freeway/National Highway 1 200 m 16. Keep left at the fork and merge onto F3 Sydney-Newcastle Freeway/National Highway 1 23.5 km 17. Take the Tourist Drive 33 exit towards Calga/Peats Ridge 1.0 km 18. Slight left onto Peats Ridge Rd 13.6 km 19. Continue onto Tourist Drive 33 2.3 km 20. Turn left onto Wisemans Ferry Rd 53.0 km 21. Turn left to stay on Wisemans Ferry Rd 31 m 22. Take the Wisemans Ferry 260 m 23. Continue straight onto Old Northern Rd 800 m 24. Turn right onto St Albans Rd 350 m 25. Take the 1st right to stay on St Albans Rd 51 m 26. Take the Webbs Creek Ferry 350 m 27. Continue straight onto St Albans Rd 140 m 28. Turn left onto Webbs Creek Rd 200 m 29. Continue onto Chaseling Rd 500 m 30. Slight right onto Bicentenary Rd 6.5 km 31. Continue onto Greens Rd 7.4 km 32. Continue onto West Portland Rd 13.3 km 33. Turn right onto Sackville Rd 6.5 km 34. Continue onto King Rd 2.0 km 35. Turn left onto State Route 69 5.6 km 36. At the roundabout, take the 2nd exit onto Bridge St 300 m 37. Continue onto Windsor Rd 2.5 km 38. Turn right onto Groves Ave (signs for Richmond/Lithgow) 270 m Groves AveMulgrave NSW

Anyone up for a cruise this wknd or next wknd? Im in the western suburbs.

AFF. NSW. Jenolan 2morrow

Hey guys I'm looking into this electronic rust guard protection and am curious if it actually works. This is for my daily driver. I have been looking at this one http://www.ebay.com.au/itm/Electronic-Rust-Protection-Corrosion-Guard-12-points-/150678828419?pt=AU_Car_Parts_Accessories&hash=item2315287583 for example. Has anyone got any feedback or know of any good quality systems available?

Not sure about the under guard what ^^^^ said sounds like a good idea. I have removed the rubber seal at the back of the bonnet. The windscreen wipers get pretty hot after a cruise around on a hot day. Even after I have shut the car off I can feel the heat radiating thru the gap at the back of the closed bonnet. The only downside I can see is the bonnet tends to have a bit of a wobble over bumps and what not but its very very minor, you only see it if your looking for it. Maybe try that if your worried. Like someone else has said I will be refitting it come winter.

Who are you getting to tune your car? Any other mods planned for the beast since your getting a tune with the new intake setup?

yep..

indisputable

Drugs

I ended up fitting the turbosmart knock off bov in the front bar on the hot side piping and fitted the stocker bov on the cold side plumbing back to the drivers side intake. Now if I jump off (17psi) boost there is no flutter and its actually fairly quiet which I like. Now I just wanna quieten down the intake noise. All that can be heard is the suction noise which is pretty noisy. I was thinking of using that stuff they rap around ac A/C compressors to line the walls surrounding the pod... should do the trick....?? Turbo badge is off. Just the big decision of painting the cooler black or not haha Love having V8's pull up beside me and thinking HA! just a poxy six I'll show him..

I bought a boost gauge for 60bux some time ago. Piece of p1ss to fit up. Its not even in a holder I just spray painted the back of it black and squeezed it in the bottom setion in front of the gear shifter. I changed the back light to a blue led to match the footwell lights. TBH I have had a fair few ppl jump in the car and no-one has even noticed it. Just make sure you hide the cable and what not well. You can get power from the ciggy lighter. It is dodgy I know but in saying that its a handy tool for 60bux and can be taken back out in a matter of a minute or 2.