Slash
-
Posts
801 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Events
Store
Articles
Media Demo
Everything posted by Slash
-
My mate in Thailand has a turtle. I LIKE TURTLES!
-
Aren't R888's an R-Compound? If so, they are suited to Circuit Work. Sidewall is too stiff for Drag Racing & will likely give less grip than average Street Tyres... I'm ambidextrous mofo, so tug with both!
-
245/40r18 & 265/35r18 R1R's please!
-
Less changing of setups, more track time/results please
-
sh*t tyre. Destroyed 2 sets in 2 nights on the F6 with huge powerskids through 4th. Drag radials or R1R's for the strip if you want a decent ET
-
Luke, your method just went haywire for me!
-
Grug bought up KU36's, then edited his post. Settle petal
-
You'll go backwards with KU36's. Get some drag radials if you want to run a decent time. I'm sure Steve will go halves in a set as he's a penny pincher just like you! ** Doesn't make much sense after Grug;s edit**
-
Old joke is old. Can't be arsed searching, but I know it was in one of the drag threads.
-
So I would have run 10.3 with a 1.5 in the F6? Yea na...
-
What intank pump & what size fuel lines Jon? You're running Injector Dynamics squirters aren't you??
-
1.5 for that setup isn't that flash & there is an easy tenth to be gained there alone. More track time & fine tuning of the setup will see this easily. Chippa would of been well into the 1.8's with a trap speed & et like that, based on the average BF weight. The S/C Coyote would chop the arse off your falcon. I'd be more than a little worried
-
Looked good on the track & still plenty left in it! I managed an 11.2 @ 120mph last night in the Calais Rob from Monsta Torque did an 11.2 @ 130mph Glen with the Manual Coyote GS (XFT Tune & Cat-Back) ran a 12.3 @ 115mph BPT Coyote GS did an 11.2, but unsure of mph
-
Burn him at the stake!
-
Not that hektic, just a VX. Who's heading down tonight?
-
Who? Haha What? Read my post again if need be... It isn't going anywhere by the looks of it. Without going into it any further & risking being banned for the 43rd time, I'll just sit back & laugh
-
$288 for a few hours work is decent for a cashie! Work ute ftw
-
O RLY? Quoted for truth & prosperity!
-
I'll cop that rate provided you pay for 40hrs Wheels World is in Ozzy Park.
-
With drag radials & 118mph you'll go 11's. Street tyres I doubt it unless you go 120mph+
-
What happened to his thread? He was a douchebag no doubt, but very entertaining!
-
Keith, sounds like you're describing the noise the wastegate flapper makes when on boost.Will be more prevelant on cooler nights... You're an idiot Luke, pay me for 40hrs labour & I'll have you're car on the road in 3hrs. Nothing on that list is hard to do. Would also suggest getting Wheels World or similar to setup your suspension for you rather than having a crack yourself. Get in corner balanced as well
-
I think he's looking at his own pin, whilst simultaneously looking at your pic!
-
Fair enough, when's it hitting the track?
