Murphh90

looking at getting Varrstoen 2.2 19x9.5 +30 19x10.5 +34 5x114.3 x 4 in Matte Black, for a FG sedan. Will they fit nicely without massive camber? Cheers

That's a neat place to put it, didn't even think of that haha. Ah well all does the same job

Hey all, I have recently disconnected the stock heat exchanger from my fg xr6t and fit an oil - air cooler. So far all is well, and more to the point... no chance of a milkshake in my gearbox! I used the PWR Cooler, got some lines, and a set of fittings from ebay (tried cutting the stock exchanger pipes off but it was to dodgy for my liking) I dont have an auto trans temp gauge however took it to the drags the other weekend, and no problems after 5 consecutive runs. Noticed the oil was a discoloured when installed the cooler, so I am going to get a flush very shortly... The install itself wasnt too hard, had to relocate the horn, and extend the fog light wiring a little bit... no big deal! Im pleased with the result. Running stock power levels atm, also I have a 10 inch thermo fan that im am going to fit to the front of my oil cooler, when I can be bothered :headbang2: This is the PWR cooler I used And the fittings I bought off ebay! Mounted the cooler under the DS headlight Used a die grinder and made a few slits in the wheel arch to let the air flow through! Any questions feel free to ask!