fpv_ute

I think this is possible, I had a hydro setup in my 200, and it had 400rwkw.... it was attached to the firewall, and came out on the left of the steering wheel. Could come in to corners at 150 and rip it in.... I drift my fg f6 ute at the drifts here in syd and am still using the stock handbrake until it gives... bottom line you cant connect drifts without a handbrake

that's sound like what I need, can you post some pics?

Where did you get the sway bar from? I get major axle tramp even before I started modding mine, My center bearing went after 5000ks on a brand new f6 manual ute and ford didnt want a thing to do with it.

2011 fg f6 manual ute leather hard teauno 9000kms making 370rwkw im 22 from Syd

I sniped it on ebay, But http://www.bestmufflers.com/bshop/index.php?cPath=119_346_485&osCsid=93e9fe918d18f377f18719e560ea37da Theres the link to cheap systems, $1500 new was piss easy to fit, I just parked half on the gutter so I could get under the ute.

The twin 2.5 doesnt hang as low, and I didnt have the choice as I got the full turbo back stainless system new for only $850

Nah mate I only drive cars with 3 pedals...

Love the panda... more sleeper like too, and what did you want more pics of?

Yea pretty hefty insurance but it was $2500 cheaper than any other quotes I got! Im a qualified builder/carpenter running my own company. I only really do houses on the northern beaches, But was helping a mate out, in seven hills...TREK!

Goes great, ill be getting a process west stage 2 cooler, surge tank, injectors and wastegate modded, and ill be taking it to tunehouse to get re-tuned, it was just very convenient as I was refitting an office 500m away today , but ill be fitting the cooler and surge tank myself. Insurance is $3050 with AAMI.

Here is the link for the video clip of the exhaust

So I got it dyno tuned today at in tune motor sport, exhaust sounds great, doesnt drone (in manual) and goes even better! we got 322 rwkw at 16psi before the stock cooler hoseclamps let go on the throttle body, But was a quick fix and tightened them up, and back it off a little, he said now cause its flowing so freely I need waste gate flap modded to maintain even boost pressure, so when he did the final run he only took it up to 4600rpm as there was still boost creep and did not want to risk blowing the stock hoses. But still got 296.8rwkw but at higher rpm it would be more like 330rwkw. Ill post up the dyno sheet and video of exhaust soon. ps how do I insert a youtube link into the post??

I just didnt waste money on piss and drugs

Hey guys, I will post up a sound clip as soon as I get it tuned tomorrow, dont want to put it into limp mode from boost spike. so driving it like a granny, I have the process west intake and battery relocation. But with a tune should sound great. Was fairly easy to bolt up to, did it in my garage in 2 hours

Just installed my new X-Force exhaust 4" dump 4" cat, to twin 2.5" to rear.

was awsome!! just editing the footage and ill throw it up....

Anyone else doing the fpv drive day on thursday 19th May? Cant wait! taking my gopro to get some footage hopefully.

Cant make it either... massive sprouter party in Palmy that I need to attend

Just uploaded a new video of my ute on my youtube acount joeemmo , waiting on my trackday to get some more footage!

Just finished polishing my whole ute finally had the motivation to do it today...im keen for this friday! Is there another post started for this cruise? I also got a sick cover for the ute Jamie what do u think??

Just bought a ute storm cover while my utes off the road, just thought I'd share some pics! It was $189 from auto barn, and it fits pretty snug.

Sweet thanks guys, didnt think it would really work, the tyre could roll off the lip if drifting hard, just wanting to get some nitto semi's for the rear and saw some 275 30 19s on ebay... should have bought those 245 40 19s off ebay a few weeks ago for $550 for 2... st george tyres stock them and wont have them in for another few weeks so ill just have to wait, I have my fpv drive day on the 19th of may so wanted them before then.