beast_man88

still makes a good read

I have 12,000k driving and 10,000k high beam. have past police tons of times they dont look twice. they are bearley even blue for 12,000 and I have them aimed just right. your probably blinding everyone. with the pits I am pretty sure that's the c**t thing the coppers do when they wanna cause you grief, it is a full inspection and emission test, from what I've heard the car runs over a shaker and all suspension checked. its more like a HARDCORE road worthy. I have been sent to pits with my old r32 (there was no way!) if you de-register it and re-register it, your set! that's what I did.

mine does this when I give it a thorough wash around doors and handles. I just remove battery terminal for a while and then all is good. not sure why it does it. it happend to me on the way to work after washing it and I didnt want the interior light draining the battery so I removed battery terminal after work I reconnected and all was good, its happend maybe 3 times now and removing that batt for an hour should fix it.

well then it cant be the clutch switch. unless my BEM is causing the car not to start as it knows its not in park, I may have to just leave to gear position switch connected and zip tied up under the car and just run a 12v to the gearbox reverse switch then to the tow harness in the boot. this will work but didnt want to do it dodge.

I have a workshop manual but it doesnt say anything about wire colours just pin numbers, it says pin B30 so I tried that and no good. I have still got the auto selector switch plugged in and zip tied under the car with it in park position. if I remove it the car will not crank. shouldnt I be able to run without this with the manual pcm. will a manual ba start with the clutch not pushed in. maybe my clutch switch is not wired correctly.

No one??

Hi All. First time posting. rather desperate for info. I have just finished converting to manual and am wondering if anyone knows where I can wire my reverse switch on the gearbox to??? I have kept the auto loom and just fitted a manual pcm. also I am having troubles with my cruise not working now. I have wired the clutch pedal switch up, do you think maybe the pcm I have doesnt have cruise enabled? Thanks in advance for any advice/info